|
|
|||||||
| New Member Introductions
Welcome to the Power Hungry Performance Forum. We're glad that you're here! Start a new thread and tell us a little about yourself! PLEASE POST TECHNICAL and/or SUPPORT QUESTIONS in the APPROPRIATE SECTION of the FORUM |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Tue, June 30th, 2009, 09:48 PM
|
||||
|
||||
Whassup!!!
Hi everyone!
Just joined as now I am a proud owner of a shiny new php.... I can't wait to get it! I have a 04STX with many upgrades.. More to follow with pics. |
|
#2
Tue, June 30th, 2009, 10:03 PM
|
||||
|
||||
|
Glad to have you with us.
 Enjoy your Gryphon.- Jack
__________________
 2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
|
#4
Tue, June 30th, 2009, 10:14 PM
|
||||
|
||||
|
Welcome aboard!
__________________
 Current mods: AEM Bruteforce CAI, Magnaflow SI/DO, Gryphon-87 & 93 tunes, Harley head lamps, tinted windows, lower grille filler, and FX2 lower valance. |
|
#5
Wed, July 1st, 2009, 01:28 AM
|
|||
|
|||
|
Welcome to the forum
|
|
#7
Wed, July 8th, 2009, 11:27 PM
|
||||
|
||||
|
Just Installed my programmer
Thanks for the welcome guys!!
 I Just got and installed my tuner today but didn't have much time to play with it :sadface:... It was real simple... Q - Does anyone know what the short connector (jack) by the OBII port is for? I did however get it running and am running the canned tunes # 2 with an adjustment to the wheel size.. It sounds better but I did not feel much of a torque increase  . Any ideas? I will mess with it more tomorrow....
|
|
#8
Thu, July 9th, 2009, 12:51 AM
|
||||
|
||||
|
Is that wire/plug part of the obd2 plug that goes into the obd2 port?
If it is it's not used. Lars
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
|
#9
Thu, July 9th, 2009, 01:01 AM
|
||||
|
||||
|
Yes it is part of the programmer cable on the OB2 end about 2" from the end the cable splits into a Y with a 4 prong connector/port. I was wondering what that was used for since it is now tucked under the console!
Ps. the OB2 cover that I came with the tuner when would I use it? Or is it only for when the tuner is not in the OB2 slot? |
|
#10
Thu, July 9th, 2009, 07:40 AM
|
||||
|
||||
|
Bill at php explained what that was for and I forgot what he said and why.
So it's not used. I wouldn't worry about it. The PLUG is for when you bring your truck to the DEALER! If you go to the dealer for service work to your truck it's always a good idea to put back to stock and to take the gryphon out. Not unless there is an agreement made that they won't reflash your PCM without approval. Once they reflash your HEX code changes and that code is the building block for your custom tunes. Lars
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
|
| Thread Tools | |
| Display Modes | |
|
|
Flowmaster 40, PHP Gryphon, AS 2" kit
Hybrid Mode
