|
|
|||||||
| Minotaur Automotive Tuning Software Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here. Also, check out our Facebook group: Facebook - Minotaur Tuners |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Fri, March 11th, 2011, 12:11 AM
|
||||
|
||||
Newbie Do,s and Dont's
I have the Minotaur on the way. Well I guess its on the way, not sure how long it takes to get a package sent out. I got 3 custom tunes for my Stage II sticks too. I am open to any advice on this software any hints, tips, experience, Anything that will keep me from hurting my truck. I have a strong background with mechanical repair but no tuning. I know only to make small changes and to be careful of what I do. I'm going to study the changes Bill make before I do anything. Anything fun to do and what to look out for. Any advice is appreciated.
Thanks John
__________________
96 7.3L E4OD, Ext. Cab 22x,xxx miles Intake, Exhaust, 6.0L IC, 4 Wheel Disc Brakes. Dana 60, Electric Fuel, SD HPOP, 6" Miter cuts, 3" plenums Rosewood Stage IIs, Built tranny. Minotaur with some tunes from Bill  Planning: Traction bars, HPOP, Nitrous?? 
|
|
#2
Fri, March 11th, 2011, 08:17 AM
|
|||
|
|||
|
Sounds like you are on the right track. Any changes you make, they should be small increments until you learn and fully understand exactly how they effect the truck.
Another "don't".... don't mess with the scalers yet. It's going to be tempting, but wait until you get really good at your tuning. Some "do's".... ask questions, lots of them. Even if you think it might be a dumb question, ask it anyway. I've noticed that the guys who tune and post here on this forum are some of the nicest and most helpful bunch you'll ever find. Also do plan to spend lots of time. Tuning isn't something that happens overnight. Enjoy, and welcome to the "club".
|
|
#3
Fri, March 11th, 2011, 12:21 PM
|
||||
|
||||
|
Thanks for taking the time to write that out, Pocket.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
|
|
#4
Fri, March 11th, 2011, 07:58 PM
|
||||
|
||||
|
Yes thank you. Ill be sure to post many questiions
__________________
96 7.3L E4OD, Ext. Cab 22x,xxx miles Intake, Exhaust, 6.0L IC, 4 Wheel Disc Brakes. Dana 60, Electric Fuel, SD HPOP, 6" Miter cuts, 3" plenums Rosewood Stage IIs, Built tranny. Minotaur with some tunes from Bill Planning: Traction bars, HPOP, Nitrous??
|
|
#5
Sat, March 19th, 2011, 08:20 PM
|
||||
|
||||
|
I got the Minotuar SW yesterday, still waiting on the the registration code though. Anyhow I also ordered 3 tunes for my stage IIs as well and was hoping they were already on the chip so I could run them now. I searched all through the supplied disk and could not find them. I cant get Phoenix Flash to read my chip and my truck wont run on it either, no WTS light or anything, ICP builds up but no start. Any idea on what I could be doing wrong or am i just going to have to wait until Bill calls me Monday with my registration code to find out whats going on. Any info. is appreciated.
Thanks John
__________________
96 7.3L E4OD, Ext. Cab 22x,xxx miles Intake, Exhaust, 6.0L IC, 4 Wheel Disc Brakes. Dana 60, Electric Fuel, SD HPOP, 6" Miter cuts, 3" plenums Rosewood Stage IIs, Built tranny. Minotaur with some tunes from Bill Planning: Traction bars, HPOP, Nitrous??
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
