|
|
|||||||
| 1999 to 2003 7.3L Power Stroke Diesel 7.3L Power Stroke Diesel equipped Super Duty and Excursion. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Thu, April 28th, 2011, 02:51 AM
|
||||
|
||||
tough question
Is it possible to tell if your truck has a shift kit installed without pulling the pan?
I bought a used 2003 and was told the trans had been rebuilt. I have since contacted the dealer I bought it from but they were unable to tell me anything about the rebuild. The truck makes really solid shifts in my opinion but I have nothing to compare it to. How firm do these tranny's shift in stock form? I'm planning to order a PHP chip soon but am afraid if it does have a shift kit the new tuning could make the shifting overly harsh. Anyone have any ideas? 
__________________
|
|
#2
Thu, April 28th, 2011, 03:38 AM
|
||||
|
||||
|
Seems like alot of the tranny guys I know like to add a tugger kit (or similar) to their re-builds, mainly from longevity. But the way I understood it, the dealer just installs a rebuilt unit and sends the original back as a core. If this is the case - it would be hard to believe the re-man OEM trans would have any modified shifting components.
If you are satisfied with the shift firmness/feel as it is now, have PHP leave the shifting parameters stock.
|
|
#3
Thu, April 28th, 2011, 12:42 PM
|
|||
|
|||
|
I specified that I have a shift kit when I ordered my reburn. Not sure if shift points were still programmed in or not...but shifting is still fine as it is now.
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx
|
|
#4
Thu, April 28th, 2011, 12:50 PM
|
||||
|
||||
|
Quote:
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
|
|
#5
Thu, April 28th, 2011, 03:04 PM
|
|||
|
|||
|
Yea, what Cody said. I wouldn't worry about it IMO.
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx
|
|
#6
Fri, April 29th, 2011, 01:50 AM
|
||||
|
||||
|
I don't have enough experience with these trucks to say whether the shifting is good or not. It definitely shifts harder than my '99 Chevy 1/2 ton but I would expect that.
On upshifts it feels like shifts are made with the torque converter locked up. They're not harsh but my butt can feel each shift. Almost like I had a subwoofer behind the seat. Is that normal? One of the reasons I want custom tunes is to improve the tranny life with the towing I do. I'd hate miss out because I didn't know any better. 
__________________
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
