ECM TCM

[Ranchstroke]

I pulled the strategy code on my 6 liter and got VXCF4DC TQCKOD2. I am filling out a form for my ficm programing and it is asking for the ECM and TCM. What do I input into each slot? thanks

[Jeremy]

VXCF4DC = ECM
TQCKOD2 = TCM

[amdriven2liv]

Not sure if this is right.

My codes are:

vxbc9nb = ECM

amz2al11 = TCM ????????? (or is this a FICM code prior to Atlas 40?)

Or am I looking for another code?

I pulled these using the Torque app.

Do I need to go find someplace to pull the right codes?

I had FICMrepair.com fix my FICM and added the Atlas 40. Now I want to do the ECM roll back.

[Jeremy]

Here is what you have.

vxbc9nb = ECM

amz2al11 = FICM

However was that the code you got after the FICM was repaired and the "A40" was installed? I only ask because that is not a good code, meaning that is not an A40 FICM calibration number.

[amdriven2liv]

Originally Posted by Jeremy

Here is what you have.

vxbc9nb = ECM

amz2al11 = FICM

However was that the code you got after the FICM was repaired and the "A40" was installed? I only ask because that is not a good code, meaning that is not an A40 FICM calibration number.

Sorry, didn't see your response until now.

That was prior to the FICM tune.

Found a place that might pull the codes so I can get an ECM roll back. Just need to figure out when to get there to have it done. !! I need the TCM code.
Every auto parts store that I stopped at looked at me with the "What the heck you talking about" look.

[amdriven2liv]

Originally Posted by amdriven2liv

Sorry, didn't see your response until now.

That was prior to the FICM tune.

Found a place that might pull the codes so I can get an ECM roll back. Just need to figure out when to get there to have it done. !! I need the TCM code.
Every auto parts store that I stopped at looked at me with the "What the heck you talking about" look.

Well. my phone can show me my ecm and ficm but not my TCM.

I stopped by a "truck performance shop" to see if they would or could get this for me. Again, deer in the head light look. Even though they sell tuners "super chip" and Edge CTS equipment. Again, no joy. They said they couldn't read it with anything they have. I pointed at the above mentioned things and they said, they would need to order those.

One more shop to try on Monday.

Anyone in Vancouver Wa. or Portland Or. that would like to get me my TCM?

My ECM = VXBC9NB

My FICM = PRZ2AL10 (Atlas 40)