![]() |
|
1999 to 2003 7.3L Power Stroke Diesel 7.3L Power Stroke Diesel equipped Super Duty and Excursion. |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Ok here is a video finally of my weird idle. I finally got a new ipr and the truck runs much better and smokes less. It still idles funny. The first part of the video is in park the end is in drive. Sometimes in drive at a stop light it will idle like that. Is it normal with my stage 2 single shots with custom fu tune?
![]() |
#2
|
||||
|
||||
![]()
Sounds like a miss, but the video quality isn't the best.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory! |
#3
|
|||
|
|||
![]()
<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf" flashvars="file=http%3A%2F%2Fvid670.photobucket.co m%2Falbums%2Fvv68%2Fepowers777%2FVIDEO0011.mp4">
The engine is hoping a little shaking the truck. Sometimes it goes away. <embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf" flashvars="file=http%3A%2F%2Fvid670.photobucket.co m%2Falbums%2Fvv68%2Fepowers777%2FVIDEO0012.mp4"> listen carefully when i let the gas gow it hops a little then it idles normal. was going up a hill maybe half throttle. ps if you cant hear i will try better video quality, |
#4
|
|||
|
|||
![]()
VIDEO0011.mp4 video by epowers777 - Photobucket
The engine is hoping a little shaking the truck. Sometimes it goes away. VIDEO0012.mp4 video by epowers777 - Photobucket listen carefully when i let the gas gow it hops a little then it idles normal. was going up a hill maybe half throttle. ps if you cant hear i will try better video quality, |
#5
|
|||
|
|||
![]()
Sounds like oil pressure issue to me. I would try to have it hooked up to a scanner and see what the pressure readings are and how/if they change with your idle.
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx |
#6
|
|||
|
|||
![]()
For some reason when you stick the scanner on my truck it wont work. I tryed 4 different scanners all no go. So what controls the oil pressure?
Some history on the truck. fu chip custom tunes stage 2 single shot injectors from rosewood (did not idle funny with old injectors) New ipr New (sensor on driver head). Run delo 400 20w 40 (know many people who run this with no problem) Last edited by epowers777; Wed, December 22nd, 2010 at 10:33 PM. |
#7
|
|||
|
|||
![]() Quote:
But I have tried a "generic" scanner on my truck before with no luck. But I can take my truck up to the mechanic, that has a snap-on Modis, and they can start pulling all kinds of info ![]()
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx |
#8
|
|||
|
|||
![]()
Try the oil pressure cross over line.... $65 and 30min to install. It balances out the oil pressure on each side of the block. I've heard that it quitens the engine some and has even fixed some idle issues. I'm going to buy it in about a week to see if it fixes my lopey idle.
it can be purchased from sinister diesel http://www.sinisterdiesel.com/other/...structions.pdf
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx |
#9
|
|||
|
|||
![]()
I will check that out. I am replaceing the cam position sensor with the original black one. I got it fron dieselorings.com I hope it fixes the idle. I would imagine that the gray sensor has well over 100,000 miles on it. I just got it going to hook it up later.
Black, Grey, & Dark Blue Cam Position Sensor Perdels Test - Diesel Forum - TheDieselStop.com Here is the site I got info from may be your idle issue also. |
#10
|
|||
|
|||
![]()
Well the sensor did not fix the problem poop! I am about ready to pull the injestors and make sure there are no problems underneath and check the torque . Im running out of stuff to do.
|
![]() |
|
|