|
|
|||||||
| New Member Introductions
Welcome to the Power Hungry Performance Forum. We're glad that you're here! Start a new thread and tell us a little about yourself! PLEASE POST TECHNICAL and/or SUPPORT QUESTIONS in the APPROPRIATE SECTION of the FORUM |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Thu, April 1st, 2021, 01:21 AM
|
|||
|
|||
Hello from GA!
Hey all,
Hailing in from the metro Atl area. The truck is an 01' excursion, 4x4. 
|
|
#2
Thu, April 1st, 2021, 09:57 AM
|
||||
|
||||
 Glad to have you with us! Nice to have some local folks on here.  What mods do you have done? Any photos?
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
#3
Thu, April 15th, 2021, 09:43 PM
|
|||
|
|||
|
Hey Bill, I called you all before purchasing my Hydra last year. My bad, I was on vacation when I saw this. I'm over in Kennesaw, GA.
Stock HPOP, Injectors, fuel system, turbo and have the lovely PMR's. Hydra chip, PHP stock tunes. Big Donnelson Air filter. 4x4, 38" tires, 3.73 open diffs, 12K winch. Just bought a Garrett 38R, Riffraff RX and HRX have yet to install. 224K (I believe, need to go check) and it's time for injectors. Experiencing hard starts (unless plugged in) based on the age of the injectors. I heard shimming the injectors would address it, but know it's their time to get replaced. Gotta tackle my driver side exhaust manifold gasket as well. Previous owner had installed a 4.30 rear while still having a 3.73 front  , when I bought it....talk about feeling the binding in the transfer case during that infamous ATL ice storm...Being that I have PMR's, I have to stay safe with injectors and tuning or I'll be give my block a sizeable peep hole. I'd like to get 238/80's as I heard its a good match for my new turbo and will need to "detune" with my custom tunes (will need help with this, "PMR Safe" tunes)  .
|
|
#4
Fri, April 16th, 2021, 02:08 PM
|
|||
|
|||
|
Forgot to add, bulletproof 4r100 from A1 transmissions in Flowery Branch.
|
|
|
|
Hybrid Mode
