|
|
|||||||
| New Member Introductions
Welcome to the Power Hungry Performance Forum. We're glad that you're here! Start a new thread and tell us a little about yourself! PLEASE POST TECHNICAL and/or SUPPORT QUESTIONS in the APPROPRIATE SECTION of the FORUM |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Wed, July 15th, 2009, 01:07 PM
|
|||
|
|||
New guy with questions? Go figure!
Hey yall!
 Been lurking around here a few times and decided I might as well sign up! I do recognize a few names from F150online where I usually goof off!  I have a 2005 F150 and currently have an Edge. I am definately interested in a performance tune and possibly in a tow tune as well? However I have heard that there is not much to improve on over the canned Edge tow tune? It will be nice to get some info straight from the horses mouth! Or at least the horses forum! 
__________________
 2005 XLT 4x4 Screw 5.4
|
|
#2
Wed, July 15th, 2009, 01:31 PM
|
||||
|
||||
|
Welcome to the forum!
PHP does have a great tow tune! Lars
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
|
#3
Wed, July 15th, 2009, 04:10 PM
|
||||
|
||||
|
Agree with Lars, and welcome over here!
As far as tow tunes go, the canned one is set up for loads in the 5-6000# range I think. I tow a 3600# trailer, so I had one written for that need. And, for both my tunes, I told Bill I really wasn't interested in burning rubber off a stoplight, but wanted good passing performance at highway speeds, and was hoping for better fuel economy too. Bill's tunes improved my driving experience in all those areas over the canned or stock tunes. - Jack
__________________
 2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
|
#4
Wed, July 15th, 2009, 04:20 PM
|
|||
|
|||
|
Thanks guys! Yeah my trailers dry weight is 6300#. So at least 7000# with all the stuff in it. It moves it fine off the line but I would like a little more upper rpm torque at hwy speed and any MPG improvement would be great. I joined over here to get as much info as possible before I order. Just want to make sure all my ducks are in a row!
__________________
2005 XLT 4x4 Screw 5.4
|
|
#6
Wed, July 15th, 2009, 09:27 PM
|
|||
|
|||
|
Welcome to the forum.
|
|
|
|
Flowmaster 40, PHP Gryphon, AS 2" kit
Hybrid Mode
