|
|
|||||||
| 6.0L PSD FICM Reprogramming Power Hungry Performance revolutionized the 6.0L FICM (Fuel Injection Control Module) programming and has been the industry standard for FICM modification for almost 15 years. If you have questions or would like more information about the benefits, please post here. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Sat, November 6th, 2010, 12:15 PM
|
|||
|
|||
ECM and FICM
I HAd my ficm reflashed by php. I mistakenly sent my ecm in to get flashed but forgot to remove my tuner. The ficm still got flashed but they sent my ecm back. I noticed no differance with the reflash of the ficm. But they said there were some tunes in the ecm that will not let the ficm live up to its potential. I read my ecm's current flash i would like to know what are the ones that need to be flashed to be compatable with my new reflashed ficm.
|
|
#2
Sat, November 6th, 2010, 07:43 PM
|
||||
|
||||
Justin,
I actually have a read of your VID information so I know what we'd be using to roll the ECM back. Your current ECM code is VXCF9M4 and we would revert to VXCF4M3. I hope this helps.
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
#3
Sun, November 7th, 2010, 05:04 PM
|
|||
|
|||
|
So how do I go about sending my ecm back, to get the right program?
|
|
#4
Mon, November 8th, 2010, 02:22 PM
|
||||
|
||||
|
Just fill in the return form and send the PCM back in for programming like before. We have the information from your previous order so you won't need to fill in the update form again.
Let me know if you have any other questions.
__________________
Bill Cohron - The Mad Doctor Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back Windows™ XP and 7. Windows™ Vista and Windows™ 8 is a pain in my a$$! Windows™ 10 is only slightly less annoying! Windows™ 11 is garbage! Much to my surprise, I'm actually quite enjoying Linux!
|
|
#5
Thu, November 18th, 2010, 12:32 AM
|
|||
|
|||
|
Where at?
Where do I get the return form from on your website? Or under the ficm info? Thanks for your help.
|
|
#6
Mon, November 29th, 2010, 10:23 PM
|
|||
|
|||
|
My ecm will be going out today, this time I took the programer out of it. Looking forward to getting it back to see if the truck comes back to life. Do you think I will get my ecm back before you go on break, just wondering cuz huntiting season in PA. I also have another Question. My uncle has an 06 or 05 and his ecm code is VXCF1D6 is that a good program or not? Thanks for your help.
|
|
#7
Tue, December 7th, 2010, 10:33 PM
|
|||
|
|||
|
My uncle has an 06 or 05 and his ecm code is VXCF1D6 is that a good program or not? Thanks for your help.
|
|
#8
Thu, December 9th, 2010, 06:25 PM
|
||||
|
||||
|
Its not as good as VXCF4, From what I can recall it had a few shifting issues. But its not as bad as VXCF7 or VXCF9.
__________________
19 F-350 6.7 Auto 16 F-350 6.7 Auto 05 Excursion 6.0, Auto, PHP Atlas 40 FICM, ARP Studs VXBC6(truck PCM) 00 F-350 7.3, 12 Speed, PHP Gryphon, PHP hydra, DAC3 95 F-Superduty 7.3 DI, Auto, Mechanics Truck 94 F-Superduty 7.3 DI, 5 speed, Flatbed
|
|
|
|
Hybrid Mode
