a quick question

ykt legend · #1 Tue, October 18th, 2011, 09:49 PM

ok all, for my first official post

I have a few questions to ask....first, i noticed that PHP only has a limited number of monochrome Gryphons. Are there still some left? My next question is if I buy a monochrome from edge directly do i have to send it in the PHP to be tuned or can I just download a program onto my computer and plug the edge into that? Thanks in advance

***Jackpine*** · #2 Tue, October 18th, 2011, 10:12 PM

Quote:

Originally Posted by ykt legend

ok all, for my first official post

I have a few questions to ask....first, i noticed that PHP only has a limited number of monochrome Gryphons. Are there still some left? My next question is if I buy a monochrome from edge directly do i have to send it in the PHP to be tuned or can I just download a program onto my computer and plug the edge into that? Thanks in advance

PHP will only convert the monochrome programmers for the 04-08 trucks. Anything else has to be a CS/CTS programmer.

You send the monochrome programmer (if you bought it anywhere other than PHP) in to PHP to be converted to a Gryphon. The CS/CTS programmers are not sent in. If you buy a monochrome programmer from PHP, it is already converted, you just have to send in your .hex code once you get the programmer.

- Jack

ykt legend · #3 Tue, October 18th, 2011, 10:18 PM

so if i buy directly from edge i just need to send a code not the actual programer? I dont really feel like waiting weeks to get my programer with custom tunes. I'd like to be able to enjoy it while im waiting for the tunes. Can you elaborate a little more about the process?

ykt legend · #4 Tue, October 18th, 2011, 10:25 PM

Edit: Assume i just bought a cs from PHP. What procedure would i go about to get custom tunes for that?

ticopowell · #5 Wed, October 19th, 2011, 01:11 AM

You need to find your HEX code, post it in this area of the forum, then wait for them to be done. You should receive instructions when you get your CS

***Jackpine*** · #6 Wed, October 19th, 2011, 12:08 PM

Quote:

Originally Posted by ykt legend

so if i buy directly from edge i just need to send a code not the actual programer? I dont really feel like waiting weeks to get my programer with custom tunes. I'd like to be able to enjoy it while im waiting for the tunes. Can you elaborate a little more about the process?

I made a rather bad typo in the post just above the one of yours I'm quoting here. I've since edited it so that it reads correctly.

If you buy a monochrome programmer from PHP (not Edge), it is already "converted" and you don't "send it in". You don't "send in" the CS or CTS programmers regardless of where you buy them.

Once you have a programmer you can use it with its "canned tunes", while you're waiting for custom tunes. The programmer will show you the "hex"/calibration code if you follow the instructions at the top of the link ticopowell gave you.

- Jack

***88Racing*** · #7 Wed, October 19th, 2011, 01:21 PM

^^^^^What he said!^^^

***Longshot270*** · #8 Wed, October 19th, 2011, 11:30 PM

I've got a quick question, are you the same ykt legend as on F150online? I may sell you mine.