|
|
|||||||
| 2009 to 2014 F-150 3.5L, 3.7L, 4.6L, 5.0L, 5.4L, and 6.2L equipped F-150s. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Tue, December 20th, 2011, 01:40 PM
|
|||
|
|||
Two Codes
My Truck 2010 5.4L Fx4
edge CTS programmer I just put new tires on my truck and wanted to correct the speedometer. So I downloaded the stock programming. Once complete I selected the stock programming again and set the tire size. All seemed well after initial drive last night. This morning wake up to two codes P0605 and P1000. After reading I turned them off and went to work. Started truck up again and codes appeared. After Lunch I will be returning all settings back to stock. I also replaced my air filter 1 day prior to updating my tire size. I am currently waiting on custom tunes. Do I need to try to reinstall the tire size? leave it all stock untill custom tunes? Any help would be appriciated. Thanks 
|
|
#2
Wed, December 21st, 2011, 11:18 AM
|
||||
|
||||
|
The p1000 is a relearn code....
The p0605 is a corrupt file code.... When changing tire size a canned/custom tune needed to be used......using stock programming it shouldnt be able to be done....
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him.
|
|
#3
Thu, December 22nd, 2011, 01:45 PM
|
|||
|
|||
|
So after all this I returned the truck back to stock and still have the P1000 code (re learn). I am sure it will go away after re learning is complete.
I did not know that using the stock programming and using the custom features to modify the tire size could not be done. thanks for the information
|
|
#4
Thu, December 22nd, 2011, 04:31 PM
|
||||
|
||||
|
You can change the tire size only when a canned/custom tune is going to be loaded....
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him.
|
|
|
|
Hybrid Mode
