Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Gryphon Programmer (Disabled)

Gryphon Programmer (Disabled)
Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it.

If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here.


 
 
Thread Tools Display Modes
  #1  
Old Wed, January 19th, 2011, 04:02 PM
morfn321 morfn321 is offline
Whopper Junior
 
Join Date: Nov 2010
Posts: 3
morfn321 is on a distinguished road
Default P0171 code

Truck just threw a P0171 code the other day. I have a 04 f150 with a custom 89 tow tune that I run all the time. I just got the tune 1 month ago, do you think its the tune thats causing the code? Should I return the truck back to stock. Truck has never had any problems and I didnt notice any performance issues.
  #2  
Old Wed, January 19th, 2011, 04:27 PM
Jackpine's Avatar
Jackpine Jackpine is offline
PHP Groupie
 
Join Date: Nov 2008
Location: Among Elk, Deer and Javalinas on the Mogollon Rim in Aridzona
Posts: 3,243
Jackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to all
Default

Quote:
Originally Posted by morfn321 View Post
Truck just threw a P0171 code the other day. I have a 04 f150 with a custom 89 tow tune that I run all the time. I just got the tune 1 month ago, do you think its the tune thats causing the code? Should I return the truck back to stock. Truck has never had any problems and I didnt notice any performance issues.
It's telling you the oxygen sensor on the passenger side has detected a "lean" condition. These are common causes:
The MAF (Mass Air Flow) Sensor is dirty or faulty. If you have an "oiled" air filter it could foul the MAF sensor if the filter is over-oiled.

A vacuum leak downstream of the MAF sensor can cause this too, but I doubt this is the problem.
My money is on the MAF sensor, given the age of your truck. When was the sensor last cleaned? I really doubt it's the tune.

Here's a link to cleaning the sensor: How to Clean MAF-2005 5.4 - F150online Forums Notice it's for an 05 model, but I think the 04s are the same.

- Jack
__________________

2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam
  #3  
Old Wed, January 19th, 2011, 05:13 PM
morfn321 morfn321 is offline
Whopper Junior
 
Join Date: Nov 2010
Posts: 3
morfn321 is on a distinguished road
Default

Thanks for the tip. The truck has 61000 miles on it. To my knowledge the sensor has never been cleaned. I dont run an oiled air filter but I will clean the sensor. Should I clear the code and see if it comes back? How long does a code usally take to come back if there is a problem? Thanks
  #4  
Old Wed, January 19th, 2011, 08:07 PM
Jackpine's Avatar
Jackpine Jackpine is offline
PHP Groupie
 
Join Date: Nov 2008
Location: Among Elk, Deer and Javalinas on the Mogollon Rim in Aridzona
Posts: 3,243
Jackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to all
Default

Quote:
Originally Posted by morfn321 View Post
Thanks for the tip. The truck has 61000 miles on it. To my knowledge the sensor has never been cleaned. I dont run an oiled air filter but I will clean the sensor. Should I clear the code and see if it comes back? How long does a code usally take to come back if there is a problem? Thanks
Certainly you should clear the code. You can do it right away. I really don't think Bill will have given you a tune that's too lean. He's been writing tunes for 04 trucks for a long time now. As you can see, my truck's an 05, which is VERY similar to yours and I've never had this problem. Supposedly though, the dealership I have my truck serviced at has performed the MAF sensor cleaning. I suppose one day I should check it myself, but "if it ain't broke..."

I used to do almost all my vehicle maintenance. Now, I save that effort for my trailer, which is more than I expected.

- Jack
  #5  
Old Mon, February 7th, 2011, 07:27 PM
88Racing's Avatar
88Racing 88Racing is offline
SENIOR MODERATOR
 
Join Date: Feb 2009
Location: Somewhere ....
Posts: 4,241
88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light
Default

I'll add some more....

While you're cleaning your MAF .....
Clean your TB.
Change your fuel filter.
__________________
SENIOR MODERATOR--PTLA

God doesn't have a Facebook but he's my friend.
God doesn't have a twitter, but I follow him.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:13 PM.


All Contents Copyright 2008-2024, Power Hungry Performance