|
|
|||||||
| F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled) If you have a question or comment relating the new F.U. Chip or FU2 Flex Chip, post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Thu, April 21st, 2011, 11:49 PM
|
|||
|
|||
light on burner flashing
Just got my f.u. chip and burner, when I plug it in, the light on the burner flashes red and green, and I can't load any programs on the chip. Any thoughts, is the chip bad??
Last edited by azzuki; Fri, April 22nd, 2011 at 12:01 PM. |
|
#2
Fri, April 22nd, 2011, 09:57 AM
|
||||
|
||||
|
WHOA......................
Calm down. A flashing LED is normal. With PhoenixFlash open, go to the "help" option in the toolbar. Does the first listing say "registration" or "activation"? Have you entered the registration information that was emailed to you? If you have, it should say "registration". If you have not, then the software is not activated. Does the computer that you have the software on have an internet connection? If you have already registered the PF software (but used the version of PhoenixFlash that was on the CD ROM in the FU package), go the support section of the website and download the latest version of PhoenixFlash (v. 1.7.454) and try again. The registration information should still be valid after the new software is loaded.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory! |
|
#3
Fri, April 22nd, 2011, 11:41 AM
|
|||
|
|||
|
I didn't mean to come off as angry, I was just frustrated, I had problems getting the software to load on my computer, and now when I finally get my f.u. I have this.. I just was hoping I wouldn't have any issues, but such is life..
 I have activated, and registered it, I still cannot put anything on the chip. |
|
#5
Fri, April 22nd, 2011, 12:36 PM
|
|||
|
|||
|
Glad you got it figured out, that Cody fella is a good dude.
Hope you brushed your teeth, you gonna be smiling like a sissy in state prison when you put the chip in your truck...lol
__________________
2000 F-250 SCLB 2wd 7.3 auto PHP stock-65t-80dd-120race-high idle-no start 4"tb exh, wicked wheel, 3 guages, AIS, coolant filt, |
|
#6
Fri, April 22nd, 2011, 12:49 PM
|
||||
|
||||
|
Quote:
That right there is wrong.....plain wrong. 
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory! |
|
#7
Fri, April 22nd, 2011, 03:47 PM
|
|||
|
|||
|
Quote:
__________________
2000 F-250 SCLB 2wd 7.3 auto PHP stock-65t-80dd-120race-high idle-no start 4"tb exh, wicked wheel, 3 guages, AIS, coolant filt, |
|
#9
Fri, April 22nd, 2011, 06:53 PM
|
|||
|
|||
|
Quote:
 Dam man how did it run?your impressions.....something 
__________________
2000 F-250 SCLB 2wd 7.3 auto PHP stock-65t-80dd-120race-high idle-no start 4"tb exh, wicked wheel, 3 guages, AIS, coolant filt, |
|
|
Linear Mode
