Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled)

Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled)
Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip.

If you have any other questions or comments about the Phoenix/TS chip, please post it here.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old Wed, February 15th, 2012, 08:01 AM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
 
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default

Quote:
Originally Posted by Robert6401 View Post
I'm quite positive that I asked prior to the install of my John Wood transmission whether or not my chip needed to be reburned, and I was told no. I would say that a JW trans is a modified trans, wouldn't you? And now the sales website and other threads here say that a modified trans requires modified tunes. So what gives?

In honesty, my truck runs fine with the combo, BUT I now feel like my tunes are the limiting factor as opposed to the transmission. I was planning to send the chip in for some changes to the tunes when I get home from this deployment, but now I'm wondering if I'll have to pay the $200 upcharge to get what I'm after due to this change in procedure.
When you ordered yours, we were still modifying the standard calibrations to work with transmission modifications (that's why your chip with "standard" calibrations was more expensive than what Corey charges now).

I don't understand what you mean about the sentence, "I now feel like my tunes are the limiting factor as opposed to the transmission."

In addition, I don't think that there's EVER been a time that Bill or I have told someone that a valve body change (or a complete aftermarket transmission like a John Wood or BTS) wouldn't need tuning changes. If nothing else, we will caution that the shifts will likely be way too firm afterward. Didn't you have your chip reburned at some point because of that already? I could be wrong.

EDIT:
I was wrong. You had a reburn for the TCC apply issue during the 2-3 upshift.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 03:37 AM.


All Contents Copyright 2008-2024, Power Hungry Performance