|
|
|||||||
| Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Sun, January 29th, 2012, 09:33 PM
|
|||
|
|||
Odd problem after chip install?
First off, I don't think this has to do with the chip or Power Hungry Performance.
I put my chip in today and now my radio is picking up a lot of interference/static. My radio used to be pretty clear, but now is really scratchy. What could cause this, did I loosen something up while putting the chip in? I removed both of the positive battery terminals for the install, and I have not mounted the switch yet, so I didn't even get into the dash yet. Kind of at a loss here? I know it is something I did, but just don't know where to start looking? |
|
|
Threaded Mode