|
|
|||||||
| 6.0L PSD FICM Reprogramming Power Hungry Performance revolutionized the 6.0L FICM (Fuel Injection Control Module) programming and has been the industry standard for FICM modification for almost 15 years. If you have questions or would like more information about the benefits, please post here. |
|
|
Thread Tools | Display Modes |
|
#5
Fri, March 12th, 2021, 12:52 PM
|
||||
|
||||
If you're wanting to monitor and program from the same device, then the SCT LiveWire is pretty much your option.
Now, a more expensive option is to go with the SCT X4 as your programmer and then use the Edge Insight CTS3 as your monitor. I much prefer that as a monitoring device, but of course that will nearly double your costs. A third option would be to have your PCM reflashed with a single modified tune and then go for the Insight CTS3. It's a little more cost effective, but also less flexible as you're limited to the single tune on the PCM. And honestly, you're only saving about $150.00. Those are pretty much your choices. Let me know if you have any other questions. 
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
|
Threaded Mode