![]() |
|
Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
Our 93 over here must be REALLY bad, my mileage went down after switching to 93. Played with the canned 87 tow and my average was about 15-17 even with gunning it a little. When I started using the canned 93 it went to 13-16. I drove the same places and drove like there was an egg under my foot. I also couldnt even get within a second of my 0-60's while using 87. Just switched back to the 87 tow that I played with and gonna see how that goes. If it still doesnt improve then I'll know its the gas.
![]() |
#2
|
||||
|
||||
well guys I just returned from my Beach trip. I ran the 87 perf tune the whole time. I got about 18 MPGs on the way down. I was cruzin' at about 70 MPH. I thought that was really good!!! On the way home I go about 16 MPGs goin about 75 to 80 MPH. My only problem that I ran into was, on the way home i noticed that when the torque converter would lock in, the truck shuddered like crazy. It did this for about 20 miles or so and then went away. Anyone have any idea of what that could have been?
__________________
![]() ![]() |
#3
|
||||
|
||||
![]()
Sounds like the lovely RXDE/RXDG shifting issue. There is in update on the server for you. See if this helps.
Thanks.
__________________
Bill Cohron - The Mad Doctor ![]() ![]() ![]() Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Much to my surprise, I'm actually quite enjoying Linux! ![]() |
#4
|
||||
|
||||
I did the update but now my custom tune is gone. How do I reload it back on to the gryphon?
__________________
![]() ![]() |
#5
|
||||
|
||||
![]()
mjphillips1981 - I understand your concern, but please don't start a new thread over this. Bill WILL be able to help you and I'll draw his attention to your problem. I managed to wipe out one of my custom tunes a while back and Bill restored it to me without too much pain om my part (other than me feeling like a jerk for causing the problem). You don't even have to worry about that. Just be patient. You'll get your tunes back.
- Jack |
#6
|
||||
|
||||
![]()
Thanks Jack!!
__________________
![]() ![]() |
#7
|
||||
|
||||
![]()
Did you use the Targeted Functions? This is the method to download ALL custom tunes. Using Gryphon Update Manager will download stock, canned tuning only.
Also make sure you are running the latest version of Pegasus. The current version is 2.01.0594, although there is an update tomorrow that changes version to 2.01.0605. Older versions of Pegasus are not compatible with the new download structure. - On Edit... Based on server information, you do appear to have the latest version of Pegasus installed. I check the download logs and it shows that you did, in fact, use the Gryphon Update Manager to update your unit. This method does not download custom calibrations and actually informs you during the download that this method will overwrite and eliminate any custom tuning when downloaded. It's possible that you may have missed this. In any event, please be sure to use the [Updates] -> [Targeted Functions] in order to download you custom updates. This should get you going again. Thanks.
__________________
Bill Cohron - The Mad Doctor ![]() ![]() ![]() Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Much to my surprise, I'm actually quite enjoying Linux! ![]() Last edited by Power Hungry; Wed, August 12th, 2009 at 12:42 AM. Reason: Additional Information. |
Thread Tools | |
Display Modes | |
|
|