Gryphon / pod questions

[Longshot270]

First, what year model is it? Mine didnt have any velcro or brackets, just had plastic molding that went around the plastic above the A/C. Should look like this.

[Rustler]

It is a 2007 F 150, the velcro and the L bracket were in a little baggie not on the pod itself.

[Longshot270]

I probably got one but havent used it. Did your come with a big plastic thing to hold the programmer?

[Rustler]

Originally Posted by longshot270

I probably got one but havent used it. Did your come with a big plastic thing to hold the programmer?

Yes mine came with the mounting pod. That's what doesn't fit.

[Longshot270]

I'd measure it with a tape measure to make sure its the right size, I know that mine is kind of hard to get on, you just gotta push down until it slide/clicks into place.

[Jackpine]

Rustler, your pod should be a "flint grey" color that matches the majority of the late model F150s. Is this the case?

If so, it should just kind of "snap down onto the part of the dash to the left of the gauges. I didn't need any kind of help from "velcro" or anything to hold it in place. I've attached a picture of mine (in action).

I tossed the velcro and aluminum L-bracket away. I didn't see how I could use them and I didn't need them.

- Jack

[Rustler]

Originally Posted by JackandJanet

Rustler, your pod should be a "flint grey" color that matches the majority of the late model F150s. Is this the case?

If so, it should just kind of "snap down onto the part of the dash to the left of the gauges. I didn't need any kind of help from "velcro" or anything to hold it in place. I've attached a picture of mine (in action).

I tossed the velcro and aluminum L-bracket away. I didn't see how I could use them and I didn't need them.

- Jack

YEP, it kinda matches the flint gray. It looks very similar to your picture and all the others Ive seen.

I took pictures but have no way to post them.

I do appreciate everyone help but even if i used a 5lb sledge hammer this things not gonna pop into anything, it hits the pillar before it gets near the correct location seems warped and is too wide. It looks identical to my neighbors edge pod which i installed, it looks similar to the edge pod I installed on this truck then removed and returned.