question re: display of COM GEAR

[Longshot270]

Hmmm, that is strange. Try finding it in another place. When you are at the main menu go to diagnostics>data stream options then see if you can find the COM GEAR by selecting a PID. If its not there then you should probably talk to Bill.

[Power Hungry]

The firmware hasn't changed in forever and all the PIDs should be in there. Here's the list...

Engine RPM
Vehicle Speed
Engine Coolant Temp
Engine Oil Temp
Trans Fluid Temp
Cyl Head Temp
Intake Air Temp
Line Press Desired
Actual Fuel Rail Pres
Output Shaft Speed
Turbine Shaft Speed
Mass Air Flow
Mass Air Flow Volt
Variable Cam
Spark Adv
Torque Control
Engine Load
APP Sensor
BatteryVolt
Inst MPG
Avg MPG
Commanded Gear

Check and make sure that your firmware is version 3.02.0639. If it's not, you'll need to update the firmware.

Let me know.

[ballisticmike]

ahh, its 2.50.3657
i'll try the firmaware update

[ballisticmike]

is this link the firmware update instructions ? i ask because it just says "update your gryphon" not "update your firmware" . Want to be sure.
http://forum.gopowerhungry.com/1034-post1.html

[88Racing]

That looks like the right one.
Follow the instructions.

[ballisticmike]

i didnt update it yet

[Jackpine]

Originally Posted by ballisticmike

i didnt update it yet

If and when you do - Make sure you update JUST the firmware in the Gryphon, NOT the "calibration". A calibration update will wipe out any custom tune you have.

I honestly can't recall at this moment if you have custom tunes or not. If you still have ONLY canned tunes, then you can update everything. But, I'm trying to head off other people possibly wiping out their custom tune(s) with a calibration update.

And, yes, Mike - the Firmware update should give you the Com(manded) Gear display option.

- Jack