|
|
|||||||
| 2004 to 2008 F-150 and Mark-LT 4.2L, 4.6L and 5.4L equipped F-150s and Mark-LTs. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Fri, January 30th, 2009, 01:59 PM
|
|||
|
|||
I think I may just remove that snorkel and leave everything else the same for now. I have a piece of 3" flexible PVC on order that I plan to run into the fender and re-attach to the stock intake. I'll post pics if it works. I wanted to find something that would work without sanding the hard pvc to fit the fender. I can only imagine how frustrated I'd become spending 3 hours trying to perfectly sand or grind the pvc pipe to fit
 . I'll try the flex and let everyone know.
|
|
#2
Fri, January 30th, 2009, 05:47 PM
|
||||
|
||||
|
The DWV intake mod requires no sanding or fitting. I can email you the instructions if you like. Bill is going to post them on here soon. Mark_123 check your PMs.
 EDIT to add: See post #71 in this thread for the DWV intake mod instructions. Last edited by kd4crs; Tue, February 10th, 2009 at 09:51 PM.
|
|
| Tags |
| dwv intake mod |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
