|
|
|||||||
| F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled) If you have a question or comment relating the new F.U. Chip or FU2 Flex Chip, post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Thu, March 18th, 2010, 04:59 PM
|
||||
|
||||
The thing that gets me is the XC3F-BA.
According to Bill's literature, there is no suffix of "BA" for the prefix of "XC3F". Just "BB-BG" which translate into NVK0-NVK5.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
#2
Fri, March 19th, 2010, 03:52 AM
|
|||
|
|||
|
Well the scanner did not work. It would link and when you go to vehicle info it says this is not supported. it says no codes stored and like2 monitors were working. When i pulled the carfax the the truck was a program car.
|
|
#3
Tue, March 23rd, 2010, 03:58 AM
|
|||
|
|||
|
I still wanna figure this out any other help?
|
|
#4
Mon, March 29th, 2010, 04:40 PM
|
|||
|
|||
|
Im still waiting for help on this.
|
|
#5
Mon, March 29th, 2010, 05:21 PM
|
||||
|
||||
|
Where are you located?
I can send you a PCM that will allow you to drive your truck while you send your PCM to PHP so Bill can know EXACTLY what the calibration code is. Up to this point, there is nothing that anyone can do since your PCM calibration code is unknown.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
