![]() |
|
2004 to 2008 F-150 and Mark-LT 4.2L, 4.6L and 5.4L equipped F-150s and Mark-LTs. |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Whenever I clean the newer fords, I have to pull the coils out to blow that water out of the whole. PITA!
__________________
2000 Black Excursion, Two 400hp 7.3 blocks with windows ![]() |
#2
|
||||
|
||||
![]()
A dirty engine compartment drives me nuts too. In fact I was going to take it to the car wash this weekend and get rid of the road salt we had this week. So if I understand right, all I should do with my '08 is a little Simple Green and the regular hose and only below the level of the heads, then use my compressor to blow as much of the water out as possible, right?
__________________
^^^ That's my dog Pete, he's a good dog..... ![]() QueenCityBashers.com South Central NC RC Bashers ![]() |
#3
|
||||
|
||||
![]() Quote:
Another cleaning product I remember now that someone uses is "Spray-n-Wash" (the stuff you spray on clothes before you put them in the washer to get rid of stains). A picture of his engine compartment looked squeaky clean. The owners manual only says to be careful with water around the intake tube. I wonder if it's possible to force some in to the filter box through the crack where the tube joins it? - Jack |
#4
|
||||
|
||||
![]()
Thanks Jack.
__________________
^^^ That's my dog Pete, he's a good dog..... ![]() QueenCityBashers.com South Central NC RC Bashers ![]() |
#5
|
||||
|
||||
![]()
Just painted my hose clamp!
![]() ![]() - Jack Last edited by Jackpine; Fri, February 6th, 2009 at 07:27 PM. Reason: Had to change the last word to better convey the message. |
#6
|
||||
|
||||
![]()
That and a PHP sticker on your back window will add at least 35 more horsepower to your truck!
![]() |
![]() |
Tags |
dwv intake mod |
Thread Tools | |
Display Modes | |
|
|