|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Tue, May 18th, 2010, 06:05 PM
|
||||
|
||||
You could try adjusting the shift firmness (lower for firmer shift/higher for softer). If that doesn't fix it then you may have to talk to Bill so he can figure out what your wanting to fix.
The lift and tires do not require a retune but a regear may need to be on the list because you can adjust tire size/gear ratio in the programmer's custom options menu.
__________________
|
|
#2
Mon, May 24th, 2010, 12:01 PM
|
|||
|
|||
|
http://forum.gopowerhungry.com/gryph...ift-1-2-a.html
Had to get re-tuned from Bill because my HEX code revs are a little old. Magnaflow cat-back SIDO + volant CAI. I played around with my shift-firmess before the re-tune and could not get it perfect. Bill saved the day for me though  Good luck.
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
