![]() |
|
1999 to 2003 7.3L Power Stroke Diesel 7.3L Power Stroke Diesel equipped Super Duty and Excursion. |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
Yes, Eric.....
We got your order form. Corey will send your invoice to you in a few minutes.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
#2
|
|||
|
|||
![]()
Hi My truck is almost ready to go! I have too many projects going on. I was wondering if my truck would start with stock tuning and my single shot injectors. I dont want to crank it a hundred times to find out it wont start without the proper tunes. I thought i read that hayjay drove it with the stock tunes for awhile it just idles ruff?
I filled the hpop pump up with oil primed the motor and now charging the battery any secrets on starting it quickly without cranking 4 ever? Again Thanks in advance. ![]() |
#3
|
||||
|
||||
![]()
Yes it will run without proper tuning, just dont expect it to run well.
Best way I have found for a fast start after injector swap is to fill the reservoir, and the heads from the front ports. This means you will need to remove the ICP sensor and the plug from the pass side head and fill them with oil. Reinstall the plug and ICP sensor, and with all the glow plugs out and the covers back on, crank the engine over a few times to clear the cylinders. Put her all back together and let her rip. Should fire almost instantly. ![]() |
#4
|
||||
|
||||
![]()
Like you'd have any experience with that, Dave........
![]() Eric, We haven't forgotten about you, it's just that writing the custom tunes for your injectors takes time....and that's something that Bill takes care of.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
#5
|
|||
|
|||
![]()
Thanks for the help. I already purged the cylinders! I will fill the channels with oil then fire her up.
Thanks for letting me know letting me know cletus. I read that it takes time and just saw.the eta on my invoice! |
#6
|
|||
|
|||
![]()
I got it started this morning. Ur right it sound like its got a lopey cam! Is it ok to drive back and forth to work? It's 38 miles one way and is it ok to have my chip in on 80hp Eco? Or do I need to pull the chip Andrew just the computer?
Ps on my cell! |
#7
|
||||
|
||||
![]()
I drove mine for a few weeks with my 300/200% hybrids on the stock programming. It was awefull! If you can put up with it I dont think there would be much harm, just try to be easy on her.
|
#8
|
|||
|
|||
![]()
Thank you Dave. I will pull my fu chip out and run it on stock tunes. My wife needs the car! by the way its amazing how fast the rpms climb when reving it up.
|
![]() |
Thread Tools | |
Display Modes | |
|
|