|
|
|||||||
| 2004 to 2008 F-150 and Mark-LT 4.2L, 4.6L and 5.4L equipped F-150s and Mark-LTs. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Fri, September 10th, 2010, 06:30 PM
|
||||
|
||||
Quote:
- Jack 
|
|
#2
Sun, September 12th, 2010, 11:55 PM
|
||||
|
||||
|
Let me know what you think, I've never seen them. Just tried their website and couldn't find any for pre-2009 though. The only reason I use the oiled filter is because I constantly have to clean my air filter. Went about 10 K on my paper filter and it isn't in that bad of shape but since I got the oiled filter I have to clean it every 3k. I'm not gonna complain about cleaning my intake filter more often since it is the only fine particle protection the engine has.
__________________
|
|
#3
Mon, September 13th, 2010, 01:14 PM
|
||||
|
||||
|
Will do. J&J was actually right about the price. $38 was the "starting low as" price. Once I entered in my specific truck, it was $56 or something. No harm though as I needed to spend $75 for my coupon to count so got a new dash pod as well.
|
|
#4
Mon, September 20th, 2010, 09:38 AM
|
||||
|
||||
|
Any way to tell if this filter is "better" then the K&N?
 It seems fine enough. It's slightly larger then the K&N while retaining the same basic shape.
|
|
#5
Wed, September 29th, 2010, 06:16 PM
|
||||
|
||||
|
I was gonna suggest the Amsoil replacement for half the price. It's good for 100k and to be cleaned at 25k with low pressure air or low suction vacuum. Mine's due a cleaning this weekend due to being in severly dusty fields the last several weeks. Gonna clean the MAF sensor while I'm at it. Then hopefully next week I'll be tuning it up with a Gryphon.
David
__________________
'05 F150 FX4 Flairside 2" AS Leveled DI/DO 50 Series Flowmaster Gotts Mod Intake (my version) 295/70/18 Terra Grapplers Wish List Gryphon Programmer/Custom Tunes Firestone air bags Wheels Gears
|
|
#6
Wed, September 29th, 2010, 09:13 PM
|
||||
|
||||
|
Whats the best way to clean the MAF sensor? Going to be getting some maintanence work done soon. Would be a good time to clean mine probably.
|
|
#7
Wed, September 29th, 2010, 09:23 PM
|
||||
|
||||
|
If I remember correctly you carefully take off the boot and undo the holding screws. Then unplug it and spray it very well with MAF sensor cleaner. Just be careful not to touch the little wire because they are the sensors. Let it dry a bit then reinstall.
__________________
|
|
#8
Wed, September 29th, 2010, 10:37 PM
|
||||
|
||||
|
Rob,
Here's a great intake mod if you haven't done it already. I think is a modded GOTTS mod. I did it and made another for my cousin. DWV Intake Mod for 2004-2008 F150 with 5.4L Engine - F150online Forums David
__________________
'05 F150 FX4 Flairside 2" AS Leveled DI/DO 50 Series Flowmaster Gotts Mod Intake (my version) 295/70/18 Terra Grapplers Wish List Gryphon Programmer/Custom Tunes Firestone air bags Wheels Gears
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
