![]() |
|
Performance Modifications and Other Conversations This is a place where we can have real, honest discussions about all things performance related. Whether it's power adders, engine parts, configurations, injectors, tuning, or whatever else you can thing of, let's talk about it! |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]()
Well, this has been done for a while now, but I thought I'd post my 'mod.' I can't take credit, I've certainly seen many others who have done this before. To start off with it is very cheap and simple, and the longest part is masking. I'd recommend this to anyone who want set their pickup out from the rest, and especially for those younger who might be considering auto body. If the hour-ish or so masking is too much for you, maybe auto body isn't your thing.
![]() Tools needed: Phillips screw driver Supplies needed: Can of paint Masking tape Remove the five screws holding the grille on, four along the top and one in the bottom center louver. Then, clean off the whatever parts of the grille you're going to paint. ![]() Start masking! ![]() Read directions on paint can and apply as directed in coats desired. ![]() Let paint dry and remove masking tape. ![]() Install and enjoy! (It's been a while so you can see some bugs on it.) ![]() Step-by-step probably not needed, but I needed captions. ![]()
__________________
Thomas H. '97 F-250 CCSB 7.3L Auto, Gauges, Modded H2E, 285/200% sticks, 7.3L IC, Stealth Dual HPOP, Pheonix chip '03 F-250 CCSB 6.0L Auto, Gryphon CTS, FICM tuning by PHP, Powermax |
#2
|
||||
|
||||
![]()
Looks nice!
I always wanted to do that with my grille, but I dont think the maroon color would look as nice as the white does. There is just something about white trucks that makes it work...... ![]() |
#3
|
||||
|
||||
![]()
Good job!
![]()
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
![]() |
Thread Tools | |
Display Modes | |
|
|