![]() |
|
Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
I haven't heard from him lately on here or in the service ticket area.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
#2
|
||||
|
||||
![]()
hey cody. I just posted to the message board in responce. I was out all day. so didnt get to it sooner. i TRIED it the way you told me and it didnt go.I just read you re -did the hex code.. I had a feeling after readin the forum that may b that was it. especially after our first conversation about being rushed. I will try the new upload tomorrow night when i get home from work. I hope it goes ... I will sent you an update when i am done
|
#3
|
||||
|
||||
![]()
thanks for the foward there longshot
![]() ![]() ![]() |
#4
|
||||
|
||||
![]()
Thats why we're here
![]()
__________________
|
#5
|
||||
|
||||
![]()
Nope. I will have to wait until I can get access to my work computer over the internet. Seems to me like we have a conflict of information regarding the HEX code. If I am thinking straight (which rarely happens these days), the one he gave me on the service ticket is not the one that I remember seeing on the order form.
I will get the problem fixed as soon as I have access to the PHP main database. Sorry for the delay, Bikerfuzz. I truly do apologize for the wait.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
#6
|
||||
|
||||
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
#7
|
||||
|
||||
![]()
Bobby,
I just want to verify that your displayed HEX code is, in fact, TEJF3PZ (which is what you have listed in your User CP) because the files that we built for you are for RXDE5E2, which will obviously not work at all. Please let me know which is the correct file so we can get this resolved. Thanks.
__________________
Bill Cohron - The Mad Doctor ![]() ![]() ![]() Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Much to my surprise, I'm actually quite enjoying Linux! ![]() |
#8
|
||||
|
||||
![]()
Bill
![]() Yes that is my correct hex code.I dont know where the other one is from.May be in the confusion I got someone else's. |
Thread Tools | |
Display Modes | |
|
|