|
|
|||||||
| Minotaur Automotive Tuning Software Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here. Also, check out our Facebook group: Facebook - Minotaur Tuners |
 |
|
|
Thread Tools | Display Modes |
|
#21
Tue, December 14th, 2010, 04:22 PM
|
||||
|
||||
This was before I looked at the type of truck you were driving.....there are parameters that dictate maximum MFD as well.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory! 
|
|
#22
Tue, December 14th, 2010, 04:45 PM
|
|||
|
|||
|
OK so my MFD in the parameters is set to 100. This brings up another question. If you have something set in the parameters such as the MFD, will that show up on the maps? So if you have MFD set at 80 will the maps limit at 80? Or will the maps go to what ever value you set them at and stay there but the parameter will just override it once the program is in the truck?
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
