![]() |
|
2004 to 2008 F-150 and Mark-LT 4.2L, 4.6L and 5.4L equipped F-150s and Mark-LTs. |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
How do you know they are clogged? Summit Racing sells high flow cats that will work great for your truck. You can also remove them if your state or county doesn't do emissions testing. You will need 2 dummy O2 sensors that go behing your missing cats so you don't have a check engine light. You can find them online for $99 a piece. I would run 3" true dual exhaust w/ your choice of high flow mufflers, and of course have "The Mad Doctor" adjust your tunes.
__________________
2nd place is 1st's loser! 2012 FX4 Waldoch M80 Edition Supercrew, 3.5L Ecoboost, Flowmaster Exhaust, K&N Air Filter, Road Armor Grill Guard, huge smile! ![]() |
#2
|
|||
|
|||
![]()
I know the cats are clogged because I have been having trouble with my truck and finally had the time to check the cats and the one side it completly gone I actually poured out some of the cat onto the ground. No we dont have any emmision testing here. So what aftermarket cats will work for my truck? And were would the o2 sensor go?
|
#3
|
||||
|
||||
![]() Quote:
__________________
2nd place is 1st's loser! 2012 FX4 Waldoch M80 Edition Supercrew, 3.5L Ecoboost, Flowmaster Exhaust, K&N Air Filter, Road Armor Grill Guard, huge smile! ![]() |
#4
|
|||
|
|||
![]()
Ok guys I got the cat problem fixed....I gutted them. Now I need help with a cat back exhaust what size exhaust pipe should I go with for true duals? Also what kind of muffler? I was also thinking about an x pipe would that help any with performance?
|
#5
|
||||
|
||||
![]()
What a mechanic once told me when I had him install true duals is that there was no need to go larger than 3". and an xpipe or something similar will help balance out the back pressure(at least that is how I understand it), so they are a good thing. I had a magnaflow muffler with an internal xpipe and it worked and sounded really good. not too loud at idle nor low speeds, but it sounded good on the highway too
![]() |
#6
|
||||
|
||||
![]()
Here is my 3 cents worth. 3" is the way to go as far as pipe diameter. X pipe sounds to be a good thing. I love my Dynomax Bullet Race Mufflers from Summit Racing. My pipe is stock until after my cats then they are 3"'s. I have 4" intercooler echo tips. Make sure to have the exhaust welded where it crosses the transmission unless you don't mind annoying leaks. They leave it like that so you can drop the exhaust to remove your transmission. But I figure who cares about cutting a little exhaust pipe to remove a transmission? At that point I am not worried about my exhaust being cut. I had mine welded and now there is no leaks and it sounds awesome. I get lots of compliments. Oh, and I had Edlebrock short headers installed also.
__________________
2nd place is 1st's loser! 2012 FX4 Waldoch M80 Edition Supercrew, 3.5L Ecoboost, Flowmaster Exhaust, K&N Air Filter, Road Armor Grill Guard, huge smile! ![]() |
#7
|
||||
|
||||
![]()
Clogged cats on a 2005 5.4?
I'd be getting it to a dealer to see if your injectors are ok....there's a tsb on them 120k miles or 11 years whichever comes first......also there's an emissions warranty good up to 80k miles or 8 years.....
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
![]() |
Thread Tools | |
Display Modes | |
|
|