|
|
|||||||
| Minotaur Automotive Tuning Software Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here. Also, check out our Facebook group: Facebook - Minotaur Tuners |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Fri, March 11th, 2011, 11:21 AM
|
||||
|
||||
Thanks for taking the time to write that out, Pocket.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. 
|
|
#2
Fri, March 11th, 2011, 06:58 PM
|
||||
|
||||
|
Yes thank you. Ill be sure to post many questiions
__________________
96 7.3L E4OD, Ext. Cab 22x,xxx miles Intake, Exhaust, 6.0L IC, 4 Wheel Disc Brakes. Dana 60, Electric Fuel, SD HPOP, 6" Miter cuts, 3" plenums Rosewood Stage IIs, Built tranny. Minotaur with some tunes from Bill  Planning: Traction bars, HPOP, Nitrous??
|
|
#3
Sat, March 19th, 2011, 07:20 PM
|
||||
|
||||
|
I got the Minotuar SW yesterday, still waiting on the the registration code though. Anyhow I also ordered 3 tunes for my stage IIs as well and was hoping they were already on the chip so I could run them now. I searched all through the supplied disk and could not find them. I cant get Phoenix Flash to read my chip and my truck wont run on it either, no WTS light or anything, ICP builds up but no start. Any idea on what I could be doing wrong or am i just going to have to wait until Bill calls me Monday with my registration code to find out whats going on. Any info. is appreciated.
Thanks John
__________________
96 7.3L E4OD, Ext. Cab 22x,xxx miles Intake, Exhaust, 6.0L IC, 4 Wheel Disc Brakes. Dana 60, Electric Fuel, SD HPOP, 6" Miter cuts, 3" plenums Rosewood Stage IIs, Built tranny. Minotaur with some tunes from Bill Planning: Traction bars, HPOP, Nitrous??
|
|
#5
Sat, March 19th, 2011, 11:25 PM
|
||||
|
||||
|
Thanks, After a little more reading I figured that out. I thought the codes were emailed or whatnot to me. Being on a server makes it pretty nice.
__________________
96 7.3L E4OD, Ext. Cab 22x,xxx miles Intake, Exhaust, 6.0L IC, 4 Wheel Disc Brakes. Dana 60, Electric Fuel, SD HPOP, 6" Miter cuts, 3" plenums Rosewood Stage IIs, Built tranny. Minotaur with some tunes from Bill Planning: Traction bars, HPOP, Nitrous??
|
|
#6
Sun, March 20th, 2011, 01:08 AM
|
|||
|
|||
|
The files might also be on the CD. Of course, you'll need your registration code to open Minotaur, but you can check the CD to see what you have.
On the disk I got, it was a folder labeled "Calibrations".
|
|
#7
Sun, March 20th, 2011, 12:59 PM
|
||||
|
||||
|
No "calibrations" folder for me. Just looks like all the generic folders everyone would get. Its tough but Ill just have ot wait for Monday. I got Mid terms to study for anyhow.
__________________
96 7.3L E4OD, Ext. Cab 22x,xxx miles Intake, Exhaust, 6.0L IC, 4 Wheel Disc Brakes. Dana 60, Electric Fuel, SD HPOP, 6" Miter cuts, 3" plenums Rosewood Stage IIs, Built tranny. Minotaur with some tunes from Bill Planning: Traction bars, HPOP, Nitrous??
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
