|
|
|||||||
| 1999 to 2003 7.3L Power Stroke Diesel 7.3L Power Stroke Diesel equipped Super Duty and Excursion. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Mon, April 18th, 2011, 03:30 PM
|
||||
|
||||
Quote:
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. 
|
|
#2
Sun, May 29th, 2011, 12:14 PM
|
||||
|
||||
|
Dyno runs done.....
Stock with stock tuning: 202 HP and 422 ft. lbs. Stage 2's and a VERY weak HPOP (2000 PSI  )385 HP and 859 ft. lbs. Now I have to spend more money to get my high pressure oil up to 3000 PSI under load. I should hit 400 HP pretty easily with that  .
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
|
|
#3
Sun, May 29th, 2011, 03:31 PM
|
|||
|
|||
|
Quote:
Good going Cody! I already want more power lol I just need more money haha
|
|
#4
Sun, May 29th, 2011, 07:33 PM
|
|||
|
|||
|
Well Cody it ought to be a little more FUN to drive now. Who did you get the injectors from?
__________________
2000 F-250 SCLB 2wd 7.3 auto PHP stock-65t-80dd-120race-high idle-no start 4"tb exh, wicked wheel, 3 guages, AIS, coolant filt,
|
|
#5
Sun, May 29th, 2011, 07:56 PM
|
||||
|
||||
|
Full Force.
I've just spent a bit of time making a 183 HP over-stock daily driver program......and that's where the truck is "done". I will never use what I have now. The 385 HP number also was made sans ANY start of injection (SOI) timing changes from a stock single-shot truck. When it's hammer-down time, it is just like somebody threw another 7.3L under the hood. Good thing I drive it nice.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
|
|
#6
Sun, May 29th, 2011, 09:07 PM
|
|||
|
|||
|
Yep, good thing you drive it nice.
__________________
2000 F-250 SCLB 2wd 7.3 auto PHP stock-65t-80dd-120race-high idle-no start 4"tb exh, wicked wheel, 3 guages, AIS, coolant filt,
|
|
#7
Tue, May 31st, 2011, 10:07 AM
|
||||
|
||||
|
I had it on the dyno again yesterday.
1200+ degree EGTs don't agree with a ruptured HPO line that happens to blow 3000 PSI oil all over the turbine housing. Good thing it happened in the shop when we had fire extinguishers handy.  I'm able to maintain 2850-2900 PSI and still make 375 HP. Torque is down though by 100 ft. lbs. That's cool with me though.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. Last edited by cleatus12r; Tue, May 31st, 2011 at 10:31 AM.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
