|
|
|||||||
| Minotaur Automotive Tuning Software Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here. Also, check out our Facebook group: Facebook - Minotaur Tuners |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Wed, May 18th, 2011, 12:15 PM
|
|||
|
|||
Quote:
As of yesterday I probably don't need it, since I got a majority of stuff dialed in that I was having trouble with before I tried the PMT1 trick. But it wouldn't hurt to go ahead and have it so I can have a reference point and baseline. So yeah, I'll still take it. I'm sure it will help me fine tune a last few bits that I'm still working with, and save me some time since I don't have an emulator right now. I still have a lot of tuning left to do with these injectors, so every little bit helps. Thanks Cody! You da' man! Tell Bill you need a pay raise. 
|
|
#2
Wed, May 18th, 2011, 12:22 PM
|
||||
|
||||
|
What if I don't think I'm worth it?
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
|
|
#3
Wed, May 18th, 2011, 12:35 PM
|
||||
|
||||
|
I have altered the stock file to hopefully take care of idle issues. It should give you a good starting point (but it may be a little "stronger" than stock).
If you need anything done to it, just PM me and I'll make some tweaks. It should be a good start though. You will have mail in a few minutes.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
