|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Thu, May 19th, 2011, 06:17 PM
|
||||
|
||||
Thanks Jack, but I had the thing (it's monochrome? bought in 2008) unplugged now for several hours and every time I go back out and try to plug it in again...same thing! The screen has a blue squared screen, but you can see the start menu ghosted ....I try and hit enter (it gives me my HEX) ...but nothing...it's like it's froze ...with a blue squared screen! I wish it is going to be as easy as rebooting! Wrong time for this to happen, I've been out work for a couple months and just don't have extra money now for a new programmer! I thought about reconnecting to my computer, but I have my wife's laptop (lost mine with the job, along with my Gryphon codes!), looks like a may need some assistance from the good people at PHP!
__________________
|
|
#2
Thu, May 19th, 2011, 06:41 PM
|
||||
|
||||
|
That sucks... :/, You can use your wife's laptop and install pegasus there and it should work. the tunes are stored on a server at PHP, so if you need to reinstall them, it should work just fine. They are only kept on there for a certain amount of time, but it is more than a year usually. Call Bill at PHP and ask him to make sure your tunes are still on the server. Calling seems to get ahold of them the quickest, but you can always try a PM to Bill or Cody and see how that goes. Good luck!
|
|
#3
Thu, May 19th, 2011, 07:16 PM
|
||||
|
||||
|
It doesn't sound like it's totally "bricked", but because your truck is still at the Level 3 tune, you're not going to be able to try any "Pegasus" reprogramming. PHP is going to have to get involved. Try getting through on their Live chat" link: FlashChat v6.0.8
I just tried there, but no one seemed to be home. You might have better luck. Many people have used it successfully. At least your truck is not disabled. - Jack |
|
#4
Thu, May 19th, 2011, 07:49 PM
|
||||
|
||||
|
Thanks again Jack. I hope you're right about it not being totally trashed. I will try and get a hold of Bill tomorrow. At least my truck is running good on the current tune up. Good thing the programmer doesn't need to be constantly plugged in for a tune up. As long as I keep running 93 octane and don't have any real issues I should be fine until I get this thing answered.
__________________
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
