|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
#11
Thu, May 19th, 2011, 12:59 PM
|
||||
|
||||
Yep, your TC is locking pretty late. To fix it go into the custom options menu next time you program. Scroll down to converter lock points. Go to the 4th gear lock and unlock points and move them both down by 10. That should bring your lock point around 55.
__________________
|
|
#12
Thu, May 19th, 2011, 01:17 PM
|
||||
|
||||
|
How are the rest of the shifts? I can fix that (lower the TCC apply or any shift speed stuff) and get it put back on Pegasus
by tomorrow afternoon.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. Last edited by cleatus12r; Thu, May 19th, 2011 at 01:29 PM. |
|
#13
Thu, May 19th, 2011, 03:04 PM
|
||||
|
||||
|
the rest of the shifts feel fine
when i fix the lock points do i switch it back to stock and then go back to the custom one to make the changes? |
|
#14
Thu, May 19th, 2011, 03:07 PM
|
||||
|
||||
|
Quote:
|
|
#15
Thu, May 19th, 2011, 03:28 PM
|
||||
|
||||
|
Is the torque converter clutch apply/release your only concern? I can make the changes and all you'll have to do is use Pegasus to download the altered tune.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
#16
Thu, May 19th, 2011, 03:53 PM
|
||||
|
||||
|
Quote:
thanks!! |
|
#17
Fri, May 20th, 2011, 01:13 AM
|
||||
|
||||
|
No you do not need to switch to stock if you are just making changes within a tune. Since it looks like Cody will be writing you a new one you will have to return to stock so that you can download it.
__________________
|
|
#18
Fri, May 20th, 2011, 01:43 AM
|
||||
|
||||
|
Quote:
ill report back with a graph just for comparison PHP rocks! 
|
|
#19
Sat, May 21st, 2011, 08:04 AM
|
||||
|
||||
|
finally got time to get the new tune on it..sorry no graph yet but its damn near perfect!!
thanks!!!!!!!! 
|
|
#20
Sat, May 21st, 2011, 12:25 PM
|
||||
|
||||
|
You dont have to get a graph for it since it is correct. I always say to get one because most people use subjective words to describe their problem. I'd rather have a graph that gives me the solid numbers rather than try to get the general feel by a long series of posts.
__________________
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
