![]() |
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Bill, The Pegasus Software is using the latest. V2.02.0994. This is for the Gryphone update. I am using Windows 7 if that helps. I used the download from the PHP "SOFTWARE" site. No other installs of pegasus prior to this as I deleted the older versions before installing this version.
My Serial number is 1018875. I got updated and custom tunes loaded on May 2009. I haven't looked at the stuttering issues till just now. sounds like what i have experienced. While sitting at stop lights, all of a sudden truck starts to stutter and run rough. didn't happen all the time, but enough that i just kept it at stock tune. Not sure why not not the same setting in CP as I haven't changed anything. |
|
#2
|
||||
|
||||
|
The serial number you have in the CP is 1018875, the same one you indicated. What's curious is that your serial number is not located on the server for a custom download so I don't know how you ever got your custom tunes. I have reset your download, so give it a try again and let me know.
Thanks.
__________________
Bill Cohron - The Mad Doctor ![]() Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back Windows™ XP and 7. Windows™ Vista and Windows™ 8 is a pain in my a$$! ![]() Windows™ 10 is only slightly less annoying! ![]() Windows™ 11 is garbage! ![]() Much to my surprise, I'm actually quite enjoying Linux!
|
|
#3
|
|||
|
|||
|
Bill, Still indicates unable to locate valid firmware file. I've turned off all my security and firewalls too. Still unable to locate
|
|
#4
|
|||
|
|||
|
OK, Weird. Bill, I chose Update Custom File Download and it Worked!!. Gryphon updated.
But if I choose Updates, Gryphon update manager It shows I have Firmware and Calibration updates. If I choose to update it I still get the, Unable to locate valid firmware File.So Bill does this mean that the file i just downloaded will fix the hesitation issue? Or is this my original Custom Tunes (I got 3)? Do I have the updated Firmware and Calibrations now. Pegasus in Gryphon Update Manager say's I don't. BTW thanks for quick replies. Yes I even went back and checked my CP to make sure i entered it correctly and both were the same number. I still have our private emails for the tunes, just to show i'm ligit. Last edited by Extreme Justice; Thu, July 14th, 2011 at 04:56 PM. |
|
#5
|
||||
|
||||
|
No worries, I'm just not sure how you had the custom tunes on the device since I don't show a download for it. Give these tunes a spin and if there is still a problem get with me and we'll make a new set.
As for the GUM, there isn't any reason to use it. The firmware hasn't had a significant update in a long time and the calibration update would just overwrite your custom tunes. Take care.
__________________
Bill Cohron - The Mad Doctor ![]() Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back Windows™ XP and 7. Windows™ Vista and Windows™ 8 is a pain in my a$$! ![]() Windows™ 10 is only slightly less annoying! ![]() Windows™ 11 is garbage! ![]() Much to my surprise, I'm actually quite enjoying Linux!
|
|
#6
|
|||
|
|||
|
Thank You. Will keep you posted.
|
|
#7
|
|||
|
|||
|
Bill, it's been 4 days and no issues whatsoever at this time. I feel like I could spin these brand new 305/55/20 BFG A/T tires on the Custom 87 Performance tune.
Thanks Again |
| Thread Tools | |
| Display Modes | |
|
|