|
|
|||||||
| Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
|
Thread Tools | Display Modes |
|
#4
Sun, September 4th, 2011, 11:49 AM
|
|||
|
|||
 So here is what I have figured out. I also plan on plugging my pos+ for the LED to my dimmer switch so I am able to dim them at night. If I cannot do that, I will install my own dimmer dial. I will have to trial and error what lights are to what position before I mount them, but it wont be that bad. I got the relays at the junk yard for under $7.00 total. They are all the same Ford part number and should work fine. I have them wired so when power is eliminated, (the switch is in that position), the power will be allowed to the LED, thus turning it on. |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode