Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Ford F-150, Expedition, Navigator, Blackwood, Mark-LT, SVT Lightning and H-D Editions (Disabled) > 2004 to 2008 F-150 and Mark-LT

2004 to 2008 F-150 and Mark-LT
4.2L, 4.6L and 5.4L equipped F-150s and Mark-LTs.


Reply
 
Thread Tools Display Modes
  #1  
Old Thu, October 13th, 2011, 04:23 PM
the.goobchik the.goobchik is offline
Whopper Junior
 
Join Date: Oct 2011
Location: The Great North (aka Canada)
Posts: 5
the.goobchik is on a distinguished road
Default

Thanks for the advice. I will use the tow tune for now. But wow I can't wait to get the custom tunes in and go full performance. Ohhh so exciting.
Reply With Quote
  #2  
Old Fri, October 14th, 2011, 01:38 PM
RevoErick RevoErick is offline
Double Whopper
 
Join Date: Oct 2011
Location: Kentucky
Posts: 45
RevoErick is on a distinguished road
Default

I had your similar worries also before my installing my Gryphon 1 week ago to date. Custom tunes on order of course. I have a 08 Screw 5.4l with CAI and Catback true duals. Canned tune #2 should be fine to start. Made a huge difference with the shift points of the transmisson and I can really feel the power gain throughout the gear now. The only issue I have is when I'm going through town with a speed limit of 35 -45 or just slower speeds in general. It almost feels like a carb vehicle would when loaded up with fuel. In short in bogs a second, burns loadedup fuel, then takes off. Don't get me wrong. Its not a problem so much as it is just annoying. Talked to Bill and he said no problem and that he had heard of a few doing that, if yours would at all that is. Hope this helped.
Reply With Quote
  #3  
Old Fri, October 14th, 2011, 09:21 PM
iHellFire iHellFire is offline
Haulin' *** since '91
 
Join Date: May 2011
Location: Florida
Posts: 32
iHellFire is on a distinguished road
Default

Alright so heres my dilemma.


I just installed my Stage 2 aFe CAI. I have custom tunes but they were set up for the GOTTS mod, I just put an order through today to get them re-tuned. After make a couple mile drive in the truck, I get back to the house turn it off, wait like 45 min and go to take another drive and I noticed my check engine light is on, used my Gryphon to check and says Bank 1 and 2 system too lean. I am freaking out now because I don't want to drive my truck with it saying that. My new tunes are on order but should I not drive my truck until I get them in? I was also wondering, what if these tunes don't help and then I have a too lean truck, I am out more money than ever expected?


I have a 2004 (new body style) 5.4 3v btw.
__________________
Reply With Quote
  #4  
Old Fri, October 14th, 2011, 11:56 PM
Longshot270's Avatar
Longshot270 Longshot270 is offline
Forum Predator
 
Join Date: Jul 2009
Location: DFW, TX
Posts: 1,878
Longshot270 will become famous soon enough
Default

Quote:
Originally Posted by iHellFire View Post
Alright so heres my dilemma.


I just installed my Stage 2 aFe CAI. I have custom tunes but they were set up for the GOTTS mod, I just put an order through today to get them re-tuned. After make a couple mile drive in the truck, I get back to the house turn it off, wait like 45 min and go to take another drive and I noticed my check engine light is on, used my Gryphon to check and says Bank 1 and 2 system too lean. I am freaking out now because I don't want to drive my truck with it saying that. My new tunes are on order but should I not drive my truck until I get them in? I was also wondering, what if these tunes don't help and then I have a too lean truck, I am out more money than ever expected?


I have a 2004 (new body style) 5.4 3v btw.
I answered your other post but I'll also add on to this one. I put in bold a portion that gives you your answer whether you get retuned or not. The gains of the new intake and tune will be pretty much the same as the gotts and original tune. Power is not something that can be added numerically based on manufacturer's claims. Based on how you worded your post the codes came up very soon after adding the intake. That is a bad sign and indicates just how far off base your MAF sensor is reading.
__________________
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:00 PM.


All Contents Copyright 2008-2024, Power Hungry Performance