Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > 6.0L PSD FICM Reprogramming

6.0L PSD FICM Reprogramming
Power Hungry Performance revolutionized the 6.0L FICM (Fuel Injection Control Module) programming and has been the industry standard for FICM modification for almost 15 years.

If you have questions or would like more information about the benefits, please post here.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old Tue, October 25th, 2011, 10:51 PM
marcakuhn marcakuhn is offline
Whopper Junior
 
Join Date: Feb 2010
Posts: 2
marcakuhn is on a distinguished road
Default

The Truck is a 2007 f250 SRW all stock except PHP FICM, PHP rollback VXCF4, Edge Programmer set on performance setting always

This is no towing and its mixed highway/City driving. Everything is hand calculated for mpg.

Before the Edge was installed I would see 14 at the very very best.

After Installation of the Edge set on the performance setting I was getting 16 at 75 mph. Cruise was set the entire time for 380 miles.

After PHP FICM my mileage stayed about the same (15.5 mpg) and only ran one tank through before I performed the rollback to VXCF4. My mileage then seem to go downhill overnight after that. The best I have seen is 11.4 mpg after running 3 tanks through.

Is there other sensors I should check? No lights on the dash. Gonna swithch to synthetic oil tomorrow see if that helps at all.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:53 AM.


All Contents Copyright 2008-2024, Power Hungry Performance