Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled)
Reload this Page Do I need to take out my PCM?
Register FAQ Calendar Mark Forums Read

Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled)
Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip.

If you have any other questions or comments about the Phoenix/TS chip, please post it here.

 
 
Thread Tools Display Modes
  #1  
Old Mon, February 13th, 2012, 01:30 PM
henrysomar henrysomar is offline
Whopper Junior
  
Join Date: Feb 2012
Posts: 2
henrysomar is on a distinguished road
Default f 250 2006 code p2106 p2107
Can any one help
  #2  
Old Mon, February 13th, 2012, 01:37 PM
henrysomar henrysomar is offline
Whopper Junior
  
Join Date: Feb 2012
Posts: 2
henrysomar is on a distinguished road
Default f250 2006 superduty with code p061b now and p0068 p0791
Any one know what's going on with this truly truck is 2006 f250 4x4 super duty 5.4 v8. Help
  #3  
Old Mon, February 13th, 2012, 07:00 PM
Hoverp Hoverp is offline
Whopper
  
Join Date: Feb 2012
Posts: 19
Hoverp is on a distinguished road
Default
Quote:
Originally Posted by henrysomar View Post
Any one know what's going on with this truly truck is 2006 f250 4x4 super duty 5.4 v8. Help
Nice hijack to the thread henerysomar....

Cleatus, I was wondering if you have read my post above and could give me the go ahead on ordering a chip, if you think the PCM nums make sense.

Thanks

Patrick
  #4  
Old Tue, February 14th, 2012, 11:51 AM
tdpower tdpower is offline
Whopper
  
Join Date: Jan 2011
Posts: 12
tdpower is on a distinguished road
Default
Quote:
Originally Posted by Hoverp View Post
Nice hijack to the thread henerysomar....

Cleatus, I was wondering if you have read my post above and could give me the go ahead on ordering a chip, if you think the PCM nums make sense.

Thanks

Patrick
I would just pull the pcm. Should only take 5-10 minutes. Here is a video of dp tuner install. Just ignore the dp tuner part but it's the same. Diesel Movies - I install a DPTuner F5 chip in my buddies truck. Positions were Stock hi idle 60tow 80econo 120 race 140smoke. Also make sure to check out the sticky on cleaning the pcm connector.
__________________
Grant -------------2000 7.3 powerstroke. PHP 6 position chip (stock,high idle,60tow,80dd,100hp,no start) autometer phantom gauges (pyro,boost, trans) 6637 filter, AIH delete. Oil crossover(died rest in peace). 6.0 tranny cooler, In tank mods, Wicked Wheel. Walker muffler, Riffraff FRX.
  #5  
Old Tue, February 14th, 2012, 11:19 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
Yes, MRT3 is valid.

You'll get PMT1 programming.
  #6  
Old Wed, February 15th, 2012, 06:54 PM
Hoverp Hoverp is offline
Whopper
  
Join Date: Feb 2012
Posts: 19
Hoverp is on a distinguished road
Default
Quote:
Originally Posted by cleatus12r View Post
Yes, MRT3 is valid.

You'll get PMT1 programming.
Copy , ordering soon.

thanks for the reply.

Ok ....

Update ;
order placed last night.

Stock
Whisper
65tow
80dd
120 race
140ex

Thanks for everything.

PHP is good people!

140 ex
Last edited by Hoverp; Thu, February 16th, 2012 at 08:41 AM.
  #7  
Old Fri, February 17th, 2012, 06:43 PM
Hoverp Hoverp is offline
Whopper
  
Join Date: Feb 2012
Posts: 19
Hoverp is on a distinguished road
Default Hey Cleatus, one question.
If I get a new torque converter, will that invalidate the chip I just ordered?

Thanks

Patrick
 

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Hybrid Mode Hybrid Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -4. The time now is 07:21 AM.

Contact Us - Power Hungry Performance Forum - Archive - Privacy Statement - Top

All Contents Copyright 2008-2024, Power Hungry Performance