|
|
|||||||
| 1999 to 2003 7.3L Power Stroke Diesel 7.3L Power Stroke Diesel equipped Super Duty and Excursion. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Sat, March 3rd, 2012, 12:16 PM
|
|||
|
|||
Could a thermal resistor be put in place where you put tge copper wire?
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx 
|
|
#2
Tue, March 6th, 2012, 10:11 AM
|
|||
|
|||
|
I'm honestly not sure, we just happened to have a piece of copper sheeting laying around in the shop that was the same thickness as the old pieces so we cut em out with a band saw and filed them down to the exact size. I don't know enough about electrical stuff to have any clue about thermal resistors lol
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
