|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
#2
Thu, March 15th, 2012, 12:28 AM
|
||||
|
||||
Boy, you are really just covering up a pretty major issue......OIL PRESSURE!
Before you tear into this thing you should throw an oil pressure gauge on it and see whats happening there. Hot oil pressure (EOT @200*) should be at least 25 psi, but in my opinion - I think 30 psi should be the absolute minimum. If the pressure is low you will just be throwing money away putting these parts into a motor that is on its way out. If I had one of these trucks I might consider loosing the phasers, but wouldnt dare do it to cover up something more serious. Good Luck! |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode