Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Ford Super Duty & Excursion > 1999 to 2003 7.3L Power Stroke Diesel

1999 to 2003 7.3L Power Stroke Diesel
7.3L Power Stroke Diesel equipped Super Duty and Excursion.


Reply
 
Thread Tools Display Modes
  #1  
Old Thu, October 4th, 2012, 11:03 AM
rammertide07 rammertide07 is offline
God & Guns
 
Join Date: Dec 2010
Location: Rogersville, AL / Currently in Pollock, LA
Posts: 305
rammertide07 is on a distinguished road
Default Truck Died

Headed to work this morning, made it about a mile and my truck died going through an s-curve. Coasted through the curves and pulled over. Tried to turn the truck over and it spun fast and strong, no fire. I noticed that the tachometer was not moving. Pulled my spare out of the glove box (recently removed black CPS that was working when removed) and I swapped it out. Still no movement from the PCM. I tried turning my gauge on but the switch was already on (LIGHT BULB!!). My gauge is grounded by the PCM...or suppose to be. Pulled fuse cover off and #30 fuse was good. Popped the hood and #24fuse?? (20amp) was blown. I ddin't have any of the big fuses so I replaced it with my radio fuse. Got power to my gauge now and tachometer registers during cranking but it still will not start. I check cranking duty cycle (40-38%) and ICP (+3k psi). I tried pulling ICP, running out of ideas at the time, and tried starting with no luck. I thought when I swapped the fuse I would more than likely blow it again. Got a tow home from my neighbor. I tried focussing on brake lights and not brain storming what the cause could be. I can hear the fuel pump humming. I'm thinking IDM fuse....a relay?? Any suggestions where to start? I am also going to check fuel bowl heater as well. Do I just check for continuity between the element and bowl?
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx
Reply With Quote
  #2  
Old Thu, October 4th, 2012, 06:48 PM
rammertide07 rammertide07 is offline
God & Guns
 
Join Date: Dec 2010
Location: Rogersville, AL / Currently in Pollock, LA
Posts: 305
rammertide07 is on a distinguished road
Default

Man this forum has slowed down....

Checked the fuses again and all under-dash fuses were good. 26/PCM and 24/keylesd entry fuses were blown in the under-hood fuse box. Going to get more fuses today and going to check fuel bowl and relays.
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx
Reply With Quote
  #3  
Old Mon, October 8th, 2012, 05:04 PM
Longshot270's Avatar
Longshot270 Longshot270 is offline
Forum Predator
 
Join Date: Jul 2009
Location: DFW, TX
Posts: 1,878
Longshot270 will become famous soon enough
Default

Yeah, it really has. Might want to give one of the larger forums a try.
__________________
Reply With Quote
  #4  
Old Mon, October 8th, 2012, 08:45 PM
rammertide07 rammertide07 is offline
God & Guns
 
Join Date: Dec 2010
Location: Rogersville, AL / Currently in Pollock, LA
Posts: 305
rammertide07 is on a distinguished road
Default

Usually if I have a serious problem, I post here and TDS to get all input I can. Currently have can 8pg thread going at TDS now. Really hope I find a solution this week so 1: I can get my truck back up and running. A sitting truck is not good. And 2: is like to be able to post what the fix is for anyone else that may have a problem like this.
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx
Reply With Quote
  #5  
Old Fri, October 12th, 2012, 02:16 PM
rammertide07 rammertide07 is offline
God & Guns
 
Join Date: Dec 2010
Location: Rogersville, AL / Currently in Pollock, LA
Posts: 305
rammertide07 is on a distinguished road
Default

Got a call from Swamp's Diesel. IDM and PCM tested good

Where to go from here? Pull harness(es) where I can go over it in the open?

Send my IDM and PCM from Swamp's to my dad (live's in North Alabama) and have him stick it in his truck, I don't think it would help but just wanting input?

What relays and fuses MUST be good for the truck to start? Only ones I can think of are #30 under the dash, #24 under the hood, and the IDM relay under the hood.

Where are the fusible links?
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx
Reply With Quote
  #6  
Old Wed, October 24th, 2012, 09:21 AM
rammertide07 rammertide07 is offline
God & Guns
 
Join Date: Dec 2010
Location: Rogersville, AL / Currently in Pollock, LA
Posts: 305
rammertide07 is on a distinguished road
Default

Here's the link to TDS thread. It's the main thread I'm keeping up to date.

Died on the road...again - Page 11 - Diesel Forum - TheDieselStop.com
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:24 PM.


All Contents Copyright 2008-2024, Power Hungry Performance