Need advice on what to do next

[ILJATO]

Hello Bill....

Thank you for your reply as it was informative and helpful. I do have few minor questions.

What SCT model do you recommend?

I also would like to be able to monitor my engine (any brand/model recommendation?) but I am having hard time finding information about minimum and maximum parameters of various parts within the engine such as temperatures, pressures, voltages, air flow and so forth.

I definitely will contact Ward to discuss about the ECM/PCM rollback and tunes.

Again, thank you for the helpful reply.

[Power Hungry]

If you're wanting to monitor and program from the same device, then the SCT LiveWire is pretty much your option.

Now, a more expensive option is to go with the SCT X4 as your programmer and then use the Edge Insight CTS3 as your monitor. I much prefer that as a monitoring device, but of course that will nearly double your costs.

A third option would be to have your PCM reflashed with a single modified tune and then go for the Insight CTS3. It's a little more cost effective, but also less flexible as you're limited to the single tune on the PCM. And honestly, you're only saving about $150.00.

Those are pretty much your choices. Let me know if you have any other questions.