|
|
|||||||
| The Conversation Pit This is where EVERYTHING else goes. No subject is too mundane. How's the weather in your area? Did your kid cut his first tooth? Really, what do you think about the President? And don't get me started on Cummins and Duramaxes. Have at it! |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Tue, March 24th, 2009, 12:26 AM
|
||||
|
||||
|
I won't post any of mine then.
Lars PS I hear voices in the garage "Clean me" over and over till it's done. Naw, that's just the wife!
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
|
#2
Tue, March 24th, 2009, 12:49 AM
|
||||
|
||||
If my garage was clean I wouldnt be able to find anything.
__________________
Chuck 1992 Calypso Green Mustang notch 1995 Mustang GT 2004 Explorer Limited A veteran is someone who, at one point in one's life, wrote a blank check made payable to 'The United States of America', for an amount of 'up to and including my life'. That is honor, and there are way too many people in this country who no longer understand it. -Author Unknown |
|
#4
Wed, March 25th, 2009, 08:11 PM
|
|||
|
|||
|
Our firehouse bay floor is coated with a Tnemec epoxy product. I could find out exactly which.
Company that applied it said it was most commonly used in hangars... None of the above mentioned static problems in 10 years, however it IS slicker than owl snot when wet. More than one FF has provided a little impromptu entertainment running across the bay...  I suggested adding sand when they laid it down but what do I know?It has been absolutely impervious to LARGE amounts of brake fluids, various ff foams (very base liquids) and hot tire pickup. The sun has been murder on the exposed sections though. They should have offered the UV adder to us... I know I'm the new guy here but, for the average garage owner I think the static issue is going to be a non-issue as it pertains to coatings, UNLESS you were parking on one of those La-Z-Guy vinyl mats or using the foam mats/pads at your workbench. I was seriously considering the mats too, I've got too much stuff to move to do the floor now... FWIW, we've been using rubber mats on top of bare concrete, sealed concrete and the epoxied concrete for 20 years with no static problems. For 10 years we've also been using foam mats on the epoxied concrete and never noticed a static problem. In both instances there's always been some amount of water around whether or not that's had some effect I honestly don't know.
__________________
bill 2005 Screw 4x4 Lariat - mostly stock 1964.5 Mustang - not stock 
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
