|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Wed, April 8th, 2009, 08:12 PM
|
||||
|
||||
No, what your brother put into the PCM should not have any effect if you correct it using the Gryphon.
So OK, now you have much smaller tires on all axles. I see them as having an unloaded diameter of about 30.5 inches. With no squish, the circumference is 2434mm. With a 7% rubber squish (what I'd start with), the value you should enter for Tire Size is 2364mm. Remember to hit <Enter> after you do that, then scroll to "Done" and hit <Enter> again to start programming. - Jack |
|
#2
Thu, April 9th, 2009, 01:45 AM
|
|||
|
|||
|
Thanks Jack i will try that in the morning and see how she works out. Everything else seems to be working fine.
__________________
2007 Supercab few mods here and there |
|
#3
Fri, April 10th, 2009, 05:46 PM
|
|||
|
|||
|
Seem to be the trick Jack. Thanks!
 Side note roughly how long is the wait for the custom tunes?
__________________
2007 Supercab few mods here and there |
|
#4
Fri, April 10th, 2009, 06:22 PM
|
||||
|
||||
|
I am not sure on the wait time for custom tunes anymore. Corey has posted 5-6 weeks. It might be more like 8. Just be patient and if it gets around the 2 months or more pm or email Bill/Corey and they should get back to you
Lars
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
