Spark Plugs

[Power Hungry]

If I remember correctly, stock Motorcraft plugs are like $12.00 to $14.00 each.

[88Racing]

Originally Posted by Power Hungry

If I remember correctly, stock Motorcraft plugs are like $12.00 to $14.00 each.

So you take that amount $96-$112 for eight of them.

There's a post called "Spark plug change" 04fx4 quoted the price of $490.
I don't know what the job rate is or the service rate so it's kind of hard to add the rest up for you. I have read up to $720 for a change! That's with no breakage.

My best advice, call around and get prices.

Lars

[04FX4]

If it was me doing this all over again, I would still go to the dealership, and have the motorcraft plugs installed. The dealership would probably be the best bet as they have done this a 1000 times. You can do it yourself as well but may not be worth the stress that may be involved...

[dplummer87]

I heard the plugs on our trucks were a Pain...but are they really that bad I cant imagine paying $500 for it... ( never paid to change them on any of my vehicle but they were all older models cars)

[Jackpine]

Originally Posted by dplummer87

I heard the plugs on our trucks were a Pain...but are they really that bad I cant imagine paying $500 for it... ( never paid to change them on any of my vehicle but they were all older models cars)

Have you looked at the TSB on changing the plugs? If not, here's a download: http://www.justanswer.com/uploads/jm...sb08-07-06.pdf It's a whole heck of a lot more than just attacking the engine with a deep well socket.

From what I can determine, it takes GREAT patience, and your truck is sitting in the shop (taking up space that can't be used for anything else) for a long time. Plus, just getting at the rear passenger side plug seems a bit of a "trick" (at least the engine doesn't have to be removed like a certain GM product about 40 years ago).

I DO wish Motorcraft would simply redesign the things to be one-piece, but I guess that's too simple.

I used to change my own plugs too, but these, I'll pass on. Oh, and to answer TA2Dsailor's question, I plan to stick with Motorcraft plugs too.

- Jack

[88Racing]

Let me take a guess what that gm car was.

Maybe a vette?

My dad used to help one of former employers with his.

Let's see if I remember how it went.

1. Get the hoist hooked up to the motor.

2. Loosen up header collector flanges.

3. While your are under there loosen the motor mounts.

4. Raise it up until tranny hit the top of tunnel. Approx 6".

Presto you had acces to the plugs.

The ones I don't like are the transverse mounted v6 engines. The firewall side bites.
Lars

[Jackpine]

Originally Posted by 88Racing

Let me take a guess what that gm car was.

Maybe a vette?

My dad used to help one of former employers with his.

Let's see if I remember how it went.

1. Get the hoist hooked up to the motor.

2. Loosen up header collector flanges.

3. While your are under there loosen the motor mounts.

4. Raise it up until tranny hit the top of tunnel. Approx 6".

Presto you had acces to the plugs.

The ones I don't like are the transverse mounted v6 engines. The firewall side bites.
Lars

Dead on Lars! I doubt many of our younger members would believe that anyone could have designed such a thing! I still have trouble believing it myself.

- Jack

[dplummer87]

Originally Posted by JackandJanet

Have you looked at the TSB on changing the plugs? If not, here's a download: http://www.justanswer.com/uploads/jm...sb08-07-06.pdf It's a whole heck of a lot more than just attacking the engine with a deep well socket.

- Jack

Holy HELL!

[88Racing]

Originally Posted by dplummer87

Holy HELL!

Do you need to clean your pants out now or pick your jaw up off the floor or thankfully enough that you were sitting down?!

So is it worth that much?

Lars