![]() |
|
Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
45 sounds pretty good to me, with 50 psi max. I think you're going to get better handling, less rolling resistance, less heat buildup, better tire wear, etc. etc., at that pressure.
- Jack |
#2
|
|||
|
|||
![]()
When we have a custom tune made for us, is OUR tire size part of that tune? If it is, can we change it if I were to go to a different size tire? I plan on lifting the truck not too far down the road. Or even if I add a leveling kit in the next month, I'll probably buy larger tires.
__________________
|
#3
|
||||
|
||||
![]() Quote:
- Jack |
#4
|
|||
|
|||
![]()
Thanks. So I wouldn't need to order another custom tune after the lift. That's good to hear!
__________________
|
#5
|
|||
|
|||
![]()
Jack the number you gave me was almost dead on. just a little more fine tuning and everything should be as close to prefect as we can get thanks a lot for the help!
|
#6
|
||||
|
||||
![]() Quote:
- Jack |
#7
|
|||
|
|||
![]()
I just got my custom tunes, took it out for a 250 mile drive this weekend. I don't have a gps, but using the mile markers on the freeway, my odometer flips about 150 feet before each mile marker. I also feel "slow" driving the same roads I'm used to. Decrease tire size a little? I have 285/75/16 Terra Grapplers, max psi 65, and running them about 43. Is this too low?
|
Thread Tools | |
Display Modes | |
|
|