Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > The Starting Point > New Member Introductions
Reload this Page Hello!
Register FAQ Calendar Mark Forums Read

New Member Introductions
Welcome to the Power Hungry Performance Forum. We're glad that you're here! Start a new thread and tell us a little about yourself!

PLEASE POST TECHNICAL and/or SUPPORT QUESTIONS in the APPROPRIATE SECTION of the FORUM

Closed Thread
 
Thread Tools Display Modes
  #1  
Old Wed, May 27th, 2009, 09:47 AM
Jackpine's Avatar
Jackpine Jackpine is offline
PHP Groupie
  
Join Date: Nov 2008
Location: Among Elk, Deer and Javalinas on the Mogollon Rim in Aridzona
Posts: 3,243
Jackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to all
Default
Sorry to hear about the job, but welcome to the forum.

You probably know this, but you ARE likely to be running lean with the CAI. PHP recommends you use the canned Level 2 tune, since it's richer, and keep your foot out of it until you can get a custom tune.

- Jack
__________________

2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam
  #2  
Old Wed, May 27th, 2009, 09:55 AM
88Racing's Avatar
88Racing 88Racing is offline
SENIOR MODERATOR
  
Join Date: Feb 2009
Location: Somewhere ....
Posts: 4,241
88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light
Default
Welcome to the forum!

Sorry to hear about the job.

Came to the right place to get info.

Lars
__________________
SENIOR MODERATOR--PTLA

God doesn't have a Facebook but he's my friend.
God doesn't have a twitter, but I follow him.
  #3  
Old Wed, May 27th, 2009, 11:12 AM
JWBFX4 JWBFX4 is offline
Triple Whopper with Cheese
  
Join Date: Feb 2009
Location: Tuscaloosa,AL
Posts: 804
JWBFX4 is on a distinguished road
Default
Welcome to the forum
__________________
Flowmaster 40, PHP Gryphon, AS 2" kit
Thanks http://screen-fx.net for the sig.
  #4  
Old Wed, May 27th, 2009, 12:10 PM
rednoved rednoved is offline
Devon
  
Join Date: May 2009
Location: Fort Worth, TX
Posts: 41
rednoved is on a distinguished road
Default
Welcome!

How do you like your AEM CAI?
__________________
  #5  
Old Wed, May 27th, 2009, 02:44 PM
cj3511's Avatar
cj3511 cj3511 is offline
Bacon King
  
Join Date: Feb 2009
Location: Fort Collins, CO
Posts: 67
cj3511 is on a distinguished road
Default
Welcome!

Jim
__________________

2002 5.4 SCREW XLT/FX4 Gryphon canned
MAC CAI Spin-Tech Cat back X-Pipe Dual In/Out Side Exit
Drawtite front hitch
Randy Ellis Light Bar w8" KC Driving Lights
265/75/16 Yokahama Geolander A/T-S
  #6  
Old Wed, May 27th, 2009, 04:41 PM
Afrancis Afrancis is offline
Triple Whopper with Cheese
  
Join Date: Mar 2009
Location: Man, WV
Posts: 107
Afrancis is on a distinguished road
Default
Welcome
  #7  
Old Wed, May 27th, 2009, 07:44 PM
BlackSTX's Avatar
BlackSTX BlackSTX is offline
Baconator
  
Join Date: May 2009
Location: Tonawanda, New York
Posts: 185
BlackSTX is on a distinguished road
Default
Thanks for the welcome everyone!

Hey Rednoved.... I like the AEM, but the quality has gone down since I bought a kit for my last Ranger. It seems like the hardware is cheaper. In fact, the other day I noticed that the isolator that supports the tube to the air dam has broken. When I went to install it, I had one of the bolts break while tightening it with a 1/4" ratchet.... and it wasn't even tight yet. I ended up replacing all the hardware from the bulk bins at work, just so I didn't have anymore issues, the isolator was the only thing I wasn't able to substitute.
__________________

Current mods: AEM Bruteforce CAI, Magnaflow SI/DO, Gryphon-87 & 93 tunes, Harley head lamps, tinted windows, lower grille filler, and FX2 lower valance.
Closed Thread

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Hybrid Mode Hybrid Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -4. The time now is 11:29 PM.

Contact Us - Power Hungry Performance Forum - Archive - Privacy Statement - Top

All Contents Copyright 2008-2024, Power Hungry Performance