|
|
|||||||
| Minotaur Automotive Tuning Software Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here. Also, check out our Facebook group: Facebook - Minotaur Tuners |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Sun, February 8th, 2009, 10:42 PM
|
||||
|
||||
Software..how and where?
When I received my Sniper "Delta Force" program, it was sent via email after completion of a EULA. The "templates" and base files also came via email. How do I get my Minotaur and RDTs?
I know my Romulator setup will be in the brown truck since it's "hardware", but I was just curious as to how I get my "software".
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. 
|
|
#2
Mon, February 9th, 2009, 09:26 AM
|
||||
|
||||
|
Good question cleatus. I can't answer your question, but I did think of another question which relates to software. Not to steal your thread though.
Is there any compatibility issues with the Minotaur software? I've notice this while looking at the Pegasus software and I'm assuming Minotaur is the same "Pegasus currently runs on Windows 98, ME, NT, 2000 and 2003 as well as 32 bit versions of XP and Vista. You can also run Pegasus on Mac OS X using Parallels or VMware Fusion. At this time we regret that we are not able to support 64 bit versions of Windows or MAC computers. For further information and instructions, please download the Pegasus Installation and Quick-Start Users Guide." If the above is same with Minotaur, is there any plans for compatibility with 64-bit Vista? How about system requirements? I either have a new 64-bit Vista computer or an older PC with XP. I'd like to be sure I can use the Minotaur software "when" I buy it.... not "if."
__________________
Thomas H. '97 F-250 CCSB 7.3L Auto, Gauges, Modded H2E, 285/200% sticks, 7.3L IC, Stealth Dual HPOP, Pheonix chip '03 F-250 CCSB 6.0L Auto, Gryphon CTS, FICM tuning by PHP, Powermax
|
|
#3
Mon, February 9th, 2009, 11:03 AM
|
||||
|
||||
|
Quote:
 
__________________
Quote:
|
|
#4
Mon, February 9th, 2009, 12:36 PM
|
||||
|
||||
|
Corey,
Can you send me a link to download the software. Also the lic file so I can start working on a few tunes before the hardware arrives. Thanks.
__________________
F250 Reg Cab - 1,172 HP / DJ# / 11.56 Fuel Only / 10.94 Nitrous / Dyno Run 10-2009 -------------------------------------------------- Wide Open Performance - Engine, Chassis Build Swamps Diesel Performance - Injectors & IDM Gearhead Automotive Performance - Stage II Cam
|
|
#5
Mon, February 9th, 2009, 05:26 PM
|
||||
|
||||
|
I hate to sound like an idiot, but I can't find ANYWHERE on your website to download the Minotaur software.......
Could you please give me a link? Thank you!!
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
|
|
#6
Mon, February 9th, 2009, 06:24 PM
|
||||
|
||||
|
Thanks Corey, I'll look for the link tonight. Can you email my codes so I can use the software?
__________________
F250 Reg Cab - 1,172 HP / DJ# / 11.56 Fuel Only / 10.94 Nitrous / Dyno Run 10-2009 -------------------------------------------------- Wide Open Performance - Engine, Chassis Build Swamps Diesel Performance - Injectors & IDM Gearhead Automotive Performance - Stage II Cam
|
|
#7
Mon, February 9th, 2009, 09:18 PM
|
||||
|
||||
|
Ditto!!!
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
