|
|
|||||||
| F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled) If you have a question or comment relating the new F.U. Chip or FU2 Flex Chip, post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Thu, December 16th, 2010, 04:55 PM
|
||||
|
||||
phyoenix to fu chip??
i have a phoenix chip, and i was looking at the fu chip, could i buy just the burner?? and would i ever have to send anything in to have it redone? and i could reburn my chip with any tune that you have listed as many times as i want right??
|
|
#2
Thu, December 16th, 2010, 04:58 PM
|
||||
|
||||
|
Yep. The cost is $550 minus whatever you originally paid for the chip. It will come with a burner and the PhoenixFlash software in addition to the library of calibrations for your PCM code.
You don't have to send anything in short of an order form.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory! |
|
#3
Thu, December 16th, 2010, 05:05 PM
|
||||
|
||||
|
alrighty thank you sir
|
|
#4
Fri, December 17th, 2010, 08:24 AM
|
|||
|
|||
|
Glad you asked 99 I've been thinking about the same thing.
__________________
2000 F-250 SCLB 2wd 7.3 auto PHP stock-65t-80dd-120race-high idle-no start 4"tb exh, wicked wheel, 3 guages, AIS, coolant filt, |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
