|
|
|||||||
| Minotaur Automotive Tuning Software Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here. Also, check out our Facebook group: Facebook - Minotaur Tuners |
|
|
Thread Tools | Display Modes |
|
#7
Mon, January 18th, 2010, 10:53 PM
|
||||
|
||||
Sure!
The binary code in the Ford EEC-V PCM is made up of 4 "banks" of memory. They are numbered 0,1,8, and 9. The emulator uses a 32K-size file that is made up of bank 8 of the binary code in the PCM (where most of the maps are). When using the emulator, the truck operates on banks 0,1, and 9 while the emulator supplies bank 8. The definition file for the emulator is also different than the standard definition so that it has the capability to change bank 8 inputs to the emulator. So, the 224K files that you have for your tunes need to be broken down into a 32K file that the emulator definition can use. The "romulator" is unable to operate all 4 bank changes.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. 
|
|
|
Threaded Mode